Recent content by Tim221

Euro cylinder stuck in door Euro cylinder stuck inside the door. Retaining bolt removed. Turned the key to various positions to try and align the cam but no success. Tried snapping the cylinder but was anti snap so now left with the inner chambers stuck in the door. Also tried drilling...

Thanks. Spindle won’t come out the door despite lubricant and hammer?

There’s nothing screwing it in on the exterior. I’ve moved the handle away from the barrel just enough to see it’s also got the same notch line as interior so will be the same problem if i snap from outside

Thanks again for your help. I hoped I would be able to snap from the other side but the UVPC handle can’t be removed from the other side, and I’d rather not rip the handles off just yet

Tried to snap. Now left with part of the barrel in the door (it was only 1 star so hoped it wasn’t fully anti snap). I guess the only option left is to drill through?

Would this still be possible if it was an anti snap lock??

Thank you

Thought it would end up in snapping the barrel. Cheers.

Thank you. I can only move the key a few degrees clockwise anticlockwise unfortunately

Thanks. I can’t unfortunately. The key only moves anti-clockwise and only a few degrees

Thanks! Screw is removed. What do you mean about the Allen key? To insert it somewhere? I’ve tried turning the key to different degrees but no luck so far

Would appreciate some help with my UVPC door. Key is stuck in Euro cylinder. Euro cylinder is stuck in the gearbox. Cant seem to remove the gearbox from the door. Any bright ideas of how to solve?? Thanks! See attached images for detail