Recent content by Tiredeyes

with a white plastic key thing you shove the bottom end of boiler and the lickle plastic screw to let water in. I found the outside drain tap and let all the water out today, there is no sludge and the water runs clear, but no inhibitor in wot so ever. I filled up system, and bled bottom...

hello all I have looked through the forum for an hour now and cannot find out the best way to do this. whether I should do it at all >? any help. thanks

you are dreaming as long as your ip address's of each wireless device are different, then you can usually have 253 (I think, maybe more, depends how you set your subnet up) wireless devices on your router if your subnet is 255.255.255.0, then you can have 253 devices. or subnet of 255.255.0.0...

100m - I thought would be plenty for 5 pirs + 1 keypad + 1 speech&Text Dialer + 1 BellBox. I have about 8m left :roll: make sure have enough, because I know what its like having to wait or go out and source more...

Just looked at my invoice, Brewtime sold me Reflex classic quad PIR's, but sent the AMQD's in the big box by accident. So just to re-iterate Brewtime did not sell me an incompatible system. So If anybody wants 4 X Prestige AMQD Plus - Anti Masking Digital Quad PIR with T-EOL for around £50...

Hey RF, Thanks for the reply, I bought them as a special "kit" from brewtime. I am very surprised that they would sell stuff that is incompatible, with each other! Will contact them tomorrow. by the way, 1 more Q... is the texecom text and speech dialer compatible with the Texecom R8Excel. I...

can I have 2 different pir's on this system? looking through the manual, it says in miscellaneous options, 3.2, I have to set it either sc or oc (short circuit or open i guess) but with two different pir,s on the system its not gona work is it? Have looked thru forum and saw a alarm.gig on...

Hello all. Help with a capital H. I have had a guy in to wire up my system, we have spent all day doing it and its all good apart from the above PIR's Cant get them to set alarm off. I have Zone 1 as the kitchen, its a PIR with Separate tamper and alarm. the other zones (2, 3, 4, 5) are the...

wicked, thanks Breezer :o)

Do you think the bell will sound once I start to open the bell box? and if i chop the wires that run from inside the house, will it blow my cutters open. will it have 240v going into it constantly? Just dont want to get blown off the ladders when i get 240v down my arm :o)

No. I wont keep old wires and I have only 1 Pir and 1 mat on the Paragon system. I will pull in new wires, for 5 pirs, bell box and remote keypad. but i need to rip out the paragon system first. FCU = fing consumer/control unit? so pull out fuse first so I dont get 240v up my arm when...

Hey Breezer, It might be 10-15 years old then? Any more input than just yes? is my 1-4 ok to do. How would you disconnect it ? or would method B be better. 1. get up ladder and disconect bell box. would there be anti-tamper switchs on a over 10 year old red large bell box, kinda sticks...

Hi All. I have a Paragon E system, maybe 20-30 years old. How do I remove it? I have looked through the forum and done a search and can not find the topic about removing an old alarm, sure I saw it somewhere but cant find it now. I will guess at 1. pull fuse out of fused spur 2...

Breezer, Good idea, Nice reply. Not Hispanic are you? Sic* Not a Politician are you? :lol: :lol: :lol:

Nice one, spanks for the quick replys. so get: 1 alarm panel (will put it up in loft, so no-one can fiddle with it) 6 PIRs (4 downstairs, dining, sitting, kitchen and hall) )1 in upstairs hallway) 1 in Loft conversion) 2 door contacts: 1 front, 1 back Door. 2 keypads, 1 wired downstairs, 1...