Recent content by tmasa

Yes, trying to sort it out after work, will try to get a better picture over the weekend. Any idea about those gable (or whatever it is called - triangle brick structures above windows) sections, is it it supposed to have any vents there ? Being double it takes most of the front and the beams...

Wouldn't use open fire even with all that humidity, but I do vape, will try. What creates draught if there is no wind, pressure is the same ?

How do I measure if it is good ? Should there be any draught if there is no wind outside?

There are maybe 5-6 small holes, and this didn't change over last 10+ years as well as rock wool insulation .. had no condensation issues before

here is a bigger picture, but the angle might not be the best .. it is around 6-8 inch gap, maybe even too much

Eave gaps are on the 3rd picture and loft hatch is now sealed (2nd paragraph). Bathroom is ventilated by opening window after shower/bath Should be some tv aeriel / lighting holes which are covered by insulation. Some small holes that led to the old water tank in the loft, now obsolete.

Hi all, ~30yo detached house Loft insulation topped up from 100 to 270 about 10 years ago. Central part is boarded, sides are not. Had no problems with condensation until last couple of years. The only variable that changed, I think, is amount of junk stored there (lots of boxes) When recent...

Update, bled some radiators upstairs yesterday (a couple had some air) didn't make any difference - still only heated for 5 min after off/on. Left it on Auto all night, was still freezing in the morning. Then switched to Manual and it miraculously heated the house for few hours. Switched to...

Had boiler off and batteries out of control unit for 1 hr. Turned boiler back on with Manual mode selected - heating started working straight away, though only lasted for 5 minutes, then went to stand by and started clicking (every 3 sec followed by 3 red lights) in both receiver modes now. Sync...

Not for 30 min, for around 5 min and using good new batteries. I think it might actually be linking (no green light but it clicks and red light flashes when flame icon appears on control unit) but relay is failing since also not working in manual mode. I can't find a single video of how to put...

Any ideas ? If it looks like receiver is definitely gone, what would be the most reliable replacement compatible with this boiler ? Would get one from Amazon already so have the option to replace when engineer comes.

hi all, The receiver sits on Ideal Logic 30 boiler. Have hot water, no heating (wasn't used since Spring) Auto mode - tried all the tricks found on this forum, new batteries, frequency change, power off, distance, resets - have fire trigger on control module, no light on receiver, no heating...

Thanks Spanner the nut with one flat side, the elipse thing is static, right ? Is 1/4 turn required here ?

Have this under one of the basins, can't find anything similar with google image search ... Thanks

There is a switch box under another cabinet that turns 3 of these lights on.