Recent content by toby8

my garden falls towards my house, ive built a retaining wall 5 course high and levelled it out. Im now in the process of doing a new patio area. I have dug down 150mm and started to clear the soil and put down hardcore, i intend to lay slabs on sharp sand and cement. But I Came down this morning...

no sorry , i was not thinking straight, i presume i carry on from JB to plug with the same type of wire. what about fuse in the plug

HI, I am fitting 6 kitchen under lights.12v 20 w. (2 lots of 3 lights I am putting the 2 wires from each transformer into a JB laid on top of the kitchen cabinet, and now wish to connect from the JB via a switch to a plug. I was going to use 1mm twin and earth, could you please tell me what...

Can you believe it, a cable(neutral) had come loose from the cooker switch,I had loosend it and obviously dislodged it : Thanks for your replys lads, very grateful

The clock does not come on at all, no electric is getting to it

i only put the plug on temporary to see if the cooker was broke.It has to be wired to the connecting box,and when it is not even the clock comes on

I removed my large electric cooker when i decorated ,and now when ive connected it back i cant get it to work. I put a neon headed screwdriver on the terminals and when the cooker is connected both live and neutral light up,but with the cooker is removed only the live lights up.(As i presume...

I have instaled a fcu and fed the live cable from ring main to it, the cooker hood will be connected later, but the neon light keeps on even if the switch is off,what have i done wrong, also am i right in changing the 13amp fuse for a 3amp. and what cable to i use to connect to hood when it...