Recent content by Tomdawn

  1. T

    Draining sealed system to fit new raditor valve.

    nickso, Could you describe to me how you would undertake this task. By realsing the pressure do you mean by opening the drain valve? Thanks for any more help.
  2. T

    Draining sealed system to fit new raditor valve.

    Ok thank you I am going to go down the route of just draining the raditor I require to change the valve on if possible. Am I right in saying the way to do this is to open the drain valve with a hose to outside. Then just open the bleed valve on the one raditor that I need to change the valve on...
  3. T

    Draining sealed system to fit new raditor valve.

    Hey, I need to drain my sealed system is a combi boiler. As I need to change one raditor valve as it is corrded. Do I need to drain the whole system including venting all the raditors to do this? Thank you for any advice I want to try and avoid any air locks if possible,
  4. T

    Re-laying stone steps in garden

    Hey I need to re-lay some stone steps that lead down to the garden in the house I have bought are all loose. I have a few questions If anyone can help. Is it best to dot the motar mix a dot in the middle then all corners of the slab, or put a full bed of motar under each slab? Does this need...
  5. T

    Leaking from sprindle on pump vale

    What do you mean by under the gland nut? unscrew the gland abit and add some ptfe around the threads of the nut? Or unscrew it all the way out? Won't this leak alot if I do. Thanks for any help.
  6. T

    Leaking from sprindle on pump vale

    Hey whats the best way of curing a leak from a central heating pump valve. I think it's coming from the packing gland on the spindle. I have heard tightening the nut on the gland around the spindle can stop the leak. But what if it doesn't? What else can be done. I realy don't want to drain the...
  7. T

    Above sink water heaters

    Hey just been to B&Q and wickies and couldn't find any of these. Do they have them at plumbers merchants? Is the lowest KW 3KW?
  8. T

    Above sink water heaters

    Thanks are the easy to wire up? Is it just like wiring up a shower realy?
  9. T

    Above sink water heaters

    Hey does anyone know how much a small above sink instantaneous water heat usualy costs? I just mean one of the small ones not the under sink ones that require pressure reducers of expansion valves. Thanks for any help.
  10. T

    Grouting 1 grout line behind toilet cistern

    Hey If tiling a bathroom were the toilet cistern has been set off the wall so I can get my tiles in to tile behind it. Is it ok if this grout line isn't grouted? Its not visiable. Behind the cistern.
  11. T

    Tiling half way up a wall.

    Ok thanks do you no how much roughly a length of tile trim costs? It will just be white trim am using white tiles.
  12. T

    Tiling half way up a wall.

    Hey If I'm tiling a bathroom full tile around the bath area. Then outside the bath area tiling half way up the room, or to the height that makes it look good around the window sils. Do I need to put tile trim on top of the last row of tiles or do people usualy just grout were the last tile ends?
  13. T

    siliconing basins back to wall

    Are yoy having me on or does silicone realy give a good enough hole. Also what size drill bit will I need if I use the fisher fixings? Is it 10mm?
  14. T

    siliconing basins back to wall

    Ok I have a soild wall then tiles. I am re-tiling it before puting the new basin in. Is screwing better or is silicone ok?
  15. T

    siliconing basins back to wall

    Hey do many plumbers not bother screwing basins with pedistals back to walls do the just stick them back with silicone. I just removed my old basin which had been in for years and it was just siliconed back to the tiles took some getting off.
Back
Top