Recent content by Ton1

all working again happy washing !?

Heat sink is live but should be 240v I think Recon module supplied by EMW electronics fitted all works. Cheers for your help

Not working on any program F1 fault or blockage needs attention error code. Have cleaned out filter renewed pump tested pressure switch pumps out when pressured. One thing is that the control box heat sink has 135volts on its casing but occasionally the m/c starts to work but the casing still...

Can anyone help before I start investigating when machine starts drying spin it starts an annoying clicking which goes if lean on door! could it be to do with door catch?

Thanks you both your promt reply thats saved me wasting money on new valve. Just one thing bugging me when the heating is turn off the valve is staying in the same position with 240v on if I was to go away for long time (I wish) the motor would just sit there cooking is there no time delay when...

the valve is working the heating/water ok but when call for heating it is very hot even when up to stat temp i have checked the wiring voltages on the motor 240v on all the time after valve has moved to position also when heating turns off i am thinking it is the limit switch defective on the...