Hi
Can anyone help with my problem please:
My 306 was stalling when I pulled up at junctions ect and I found that my idle valve was completely closed. After browsing on the net I found that this was a common problem. I could get the car working ok by physically slowly pushing the plunger...
I have a pumped system feeding into the top of my hot water cylinder (as well as to my rads). The return from the cylinder meets the radiator returns at the boiler input.
Having drained the system, refilled and bled the radiators my central heating is now working but I dont seem to have any...
I've rerouted some pipes and now my upstairs radiators are fine but there is no heat at all from my down radiators. If i turn off a rad upstairs the heat travels further down the pipe so I think I've got a flow problem. To prove a point I've put the system back (nearly) as it was to see if the...
Thanks for the advice but after leaving the pump running for an hour and then lighting it, everything ok. I now have a new problem - I've rerouted some pipes and now my upstairs radiators are fine but there is no heat at all from my down radiators. If i turn off a rad upstairs the heat travels...
Thanks for the advice but after leaving the pump running for an hour and then lighting it, everything ok. I now have a new problem - I've rerouted some pipes and now my upstairs radiators are fine but there is no heat at all from my down radiators. If i turn off a rad upstairs the heat travels...
I have a gloworm 50 fuelsaver boiler - part of a pumped central heating system. I\\\'ve just drained my syystem and rerouted some pipes. after curing some leaks I bled the radiators and set the pump running (boiler off). I heard gurgling for a while then it went pretty queit. I then assumed...