Tonythecat's latest activity
-
TTonythecat replied to the thread Leaking boiler connection.No sorry. I thought id confused things as the picture is upside down. So the part that ive circled actually screw up onto the threaded...
-
TTonythecat replied to the thread Leaking boiler connection.Green circle shows where leak is coming from. This is where it conects onto the thread that prodrudes from under boiler
-
-
TTonythecat replied to the thread Leaking boiler connection.Checked and nothing in the filling loop. Wonder if it was never fitted with one. Found this pic which is nearest i can find and it shows...
-
-
TTonythecat replied to the thread Leaking boiler connection.Directly above it is the dhw flow turbine which has a mesh so it wouldnt get through but no sign of owt on the mesh ?
-
TTonythecat replied to the thread Leaking boiler connection.Thanks for the replies. When i push the nut down i can see the top of the inner part and its just metal definately no remnants of any washer
-
THi ive got a leak to the cold feed to my boiler can anyone advice if this joint should have some type of washer or joint compound Any...
-
-
TTonythecat replied to the thread Asbestos worry.Thanks very much for this. The house was in pretty much original 1930s condition with only 1 owner up until around 15 years ago when the...
-
TOK I've seen this once before and the only logical explanation would be a cement board of some sort under the shower area to deal with...
-
TTonythecat replied to the thread Asbestos worry.So thats why i pulled the bulb out as i wanted to try and see if it was a separate board. Problem is the metal insert of the spotlight...
-
TTonythecat replied to the thread Asbestos worry.Yes thats right. Plaster board over it
-
TTonythecat replied to the thread Asbestos worry.Thanks for the reply. So the house is 1930s Not ex council. The vacume was a wet one where it sprays water then sucks it back up
-
THi all I have tried to remove a small area of ceiling to access my shower trap. I drilled through the plaster board but then the drill...
-
