Recent content by toyzone

  1. T

    Cold shower

    Ineed it does. with no disrespect to the Scotts. we have 'bag pipe plumbing' in the lof space, which needs to go! cheers :wink:
  2. T

    Cold shower

    Hi Softus, Many thanks for your advise, good point about horrible germs! one I shall keep in mind. I can show provide images of the loft space and the present set up, which would help in any decision as to 'which parts to crop'
  3. T

    Cold shower

    More help please. Have a Y plan gravity pump system, wish to change to a combi system. bluntly, do I need to get rid of all the pipe work in the loft? I would be repalcing the present boiler in the kitchen, removing the old unit. I am considering 'cutting all off' that is in the loft. what...
  4. T

    Cold shower

    Hi Softus, A big thank you to you. I took your advise, chatted with Bristan. and they are sending the thermostat FOC on 48hr delivery. My thanks to you agian. Col. :)
  5. T

    Cold shower

    Hi Softus, I did call them, and they would replace should it be faulty, change the cartridge, but only if I offer them a paid reciept. Which I gave to the plumber when fitting out the whole bathroom. Do you feel the cartridge is the cause of the problem? I am seven miles from Bristan products...
  6. T

    Cold shower

    I have a Bristan Artimus thermostatic shower which will not get hot. I have removed debris from the hot and cold filters, no improvement. I have taken out the cartridge that regulates the temperature, this too had a build up of deposits from hard water, washed in vinegar/water solution, replaced...
  7. T

    timer

    Read article May 3rd 3003 I have almost the same problem. Chris R sorted out 'Klunk' can he or others help me. Changed to a Tempus 7 from an old 800 series timer. Did not mark wires. The pump and boiler are wired to the clock, the divert valve (see picture) has 4 x coloured wires including...
  8. T

    Cold bathroom radiator

    All radiators okay apart from bathroom, I have replaced a portion of pipe with 15mm to 10mm as a kink was suspected of causing poor flow. Prior to connection, pushed a wire down the 10mm clearing out sludge. I have put flushing fluid in the expansion tank, and am due to drain down. since then...
Back
Top