Recent content by viciousvinny

I have been given a 2002 citroen relay van 1.9d, the same as the expert, scudo etc, I know the older models used the xud9 engine, is it possible to put a 1999 1.9d berlingo engine in, they both have the EGR valve, I think that the P/S pump may be in a different place, but apart from some...

many thanks for all the replies Dave

many thanks keith, i tried it in the house as soon as i bought it and it works fine, just can't find where to get an elec. therm.? dave

many thanks, i'll search the net to see if i can find anything cheers dave

many thanks RACKET, any idea where i can get one from? cheers dave

thanks, turning the thermostat up or down will not restart the fridge, it only seems to work if i turn it off then on with the door open, as soon as the door shuts, it goes off? i think i'll have to get 2 seperate ones dave

s*%t, i'm confused, even though the shed is cold, the inside of the fridge isn't and it still won't switch on to cool itself unless the door is open ?? sorry for being dull, but i can't understand why having another sensor and compressor would make it work, does that mean if i get a combined...

ah, so if i have a small fridge on top of a small freezer, this would definately work ? could you try to explain this so i might understand cheers dave

surely there has got to be a better way, i've heard of loads of people who keep there fridges in the shed/garage? dave

hello, i have just aquired an lec fridge freezer, IT IS OUTSIDE IN MY GARAGE IN THE COLD.......i let it settle for 48hrs before switching on, if i leave the door open, it buzzes away quite merrily and ice starts to form in the freezer, as soon as you shut the door - after a few minutes it stops...

cheers, tried that but it was half way up the filler at the top, any way, once again....many thanks

keith (and anyone else that answered)- you are an absolute diamond, as soon as i had a good look at the seal, i could see how it fitted, took me about quarter of an hour altogether, used a small dowel with some paper packing to jam the spring - worked a treat. And guess what? i removed the top...

hi, has anyone got a picture of a seal in situ so i know i am putting it in the right place? cheers :oops:

the most difficult bit is trying to get the seal to stay on, as soon as i get quarter of the way round it pops off again? thanks dave

thanks, what do you mean by turning the front of the seal in on itself? should i do this before i attempt to fit it? cheers dave