Recent content by whoisjay

Thanks Dave.

And when its on and up to temp?

Thanks Dave. I had a rummage around in the garden and found some hose pipe fixtures and a short length and luckily was able to screw the pipe onto the manifold outlet. I have drained off some water and brought the pressure down to 2.2 bar now. Hopefully it will hold this pressure now, but will...

We have Robbens underfloor heating throughout the whole house. There are manifolds for each floor with what seems to be a bleed valve at the end, but the chap who put them in has left them facing the wall and so it next to impossible to get a bucket under. Is that basically the only option...

Is it possible to manually operate the pressure release valve on the Vaillant ecoTEC 637 boiler or is it just controlled by the boiler itself? My pressure is at 3.1 bar and despite the filling loop being completely off, the boiler does not seem to be lowing its pressure back to an acceptable...

This post is just over one year old, but I have a very similar situation. Its New Years eve, so getting hold of a plumber is impossible !! Any help would be much appreciated... We have a Vaillant ecoTEC 637 boiler (less than 4 months old). After being away for a while, we had the boiler...