Recent content by Zelfer

Hi. Finally getting around to looking at upgrading the fan over the shower from a basic (25l/s)( in line 4inch duct extractor mounted in the loft space, venting 3.5 meters away venting in the soffit, via flexipipe (uninsulated) with a 225L unit with timed run on & humidstat monitor and &...

Just had it identified as a trevi therm at the local plumbers merchant. Part ordered. Cheers for reading!

Thanks, as I thought. It's why I've done it tonight so I can get to the plumbers first thing in the morning and still return after testing for other parts if the valve replacement doesn't fix the problem. ( who works half days Saturdays nowadays!) I'm desperately hoping it's not the...

Hi. I've got a concealed thermostatic shower unit that has started to suffer from cold water not turning off when it's turned off at the wall. Confirmed its the cold water that is bypassing by turning off the water at the cold water inline isolator and the water stopped leaking from the head...

Well I'm onto hotpoint for help. Their answer is ' we'll send an engineer around at your cost, can't give you any other info" No further forward with this then :-(

Thanks for the suggestion, however the instructions say In all cases, locate the Infrascan so that the ‘approach path’ is across the ‘field of view’ and not directly towards the Infrascan' I think I'm sorted with a microwave Doppler sensor, and hoping it doesn't interfere with WiFi took much!

Good shout, not sure why I didn't think of that! Thanks < Tootles off to start searching for 240v powered units>

Unfortunately I don't have a ceiling to fit to. The docs also day less sensitive if walking directly towards the pir (in pictures)

I'm trying to find thea suitable PIR for a 10m long, open topped orridor where I can really only wire at the end of the corridor due to cosmetic reasons. I've had a good look around, but all the pirs I've seen are for crossing beams and provide a wide angle of view, so not sensitive enough for...

What exactly do you want it for? Sorry to point you at another forum, but budgetlightforum.com might be able to answer you in some detail about doing this type of thing with some very fancy UV LEDs. http://budgetlightforum.com/node/44655 might be a good start, and replace the LEDs they dropped...

Hi. I've got an about 4 year old hotpoint sdl510p dishwasher that has given up the ghost. When turned on, it is OK for a few minutes, then do flashes the wash (3h) and end (9h) lights, and a pump continues to run. This error code isn't in the manual, hoping someone might be able to shed some...

Well, we guessed it was coming. I haven't fitted one yet, and came home today to find someone had tried to break into our garage. Thankfully, they didn't get in, but they damaged lots trying to get in. Bastards

Hi. I've got a leaking box gutter between my roof and conservatory that I want to have a good look at. Unfortunately, the only access to the gutter area is either over the conservatory or over the roof, so I need to walk over the roof to take a look. What is the safe walking weight on a...

I'm wanting to see what's going on, hoping that access from underneath will allow me to see the source of the water, and therefore determine which of the 5 joints in the gutter run have failed. However, after a huge downpour yesterday and today, there was no water running in, so not sure if it's...

We've recently had a number of what appear to be leaks from a box gutter in our conservatory that I'm trying to solve, So want to understand where it is actually coming from by looking underneath the guttering ( I recently had the gutter cleaned due to it overflowing due to blocked downpipe...