Recent content by Woodfortrees

What should we cut with? Is a manual saw ok?!

HELP! Our washing machine drainage was overflowing - the flexible washing machine hose normally slots into an open vertical waste pipe (see first pic) but instead of draining away it was overflowing. My husband tried to clean it out with the garden hose with a jet attachment, but then the brass...

I spoke too soon - how do we even find the salt sensor?! We've got the heat pump out, but I can't find any video tutorials on how to find the salt sensor...

We have a Bosch Dishwasher (SMS25AW00G/56, Serie 2 SilencePlus). Says error code 09, which apparently can be caused by a failed heating element, a faulty control board, or an incorrectly functioning sensor that doesn't detect water & salt levels properly. So I've read that we should check the...

Hi Ian, I'm not too sure what you mean by plug & plate so here is a photo - I've marked with red lines where the wires come in from the wall plug - although they meet a bunch of other wires already there so don't know if that was what you meant!Red Lines show mains wires by Woodfortrees posted...

Thank you. Are any of you heating engineers who might happen to live near Beckenham ?!

Don't worry, I won't touch it! Out of interest do you think that what it is set to is good?

That's interesting to know you can't run the summer air & heating at the same time. I guess that makes sense. The switches on mine are such that you could have 'Summer Air' & 'Heating' both set to 'on all the time' - in that scenario would Summer Air run until the heating kicks in (eg. when...

Don't worry Old Salt I am not about to start fiddling with it! Just really keen to try to understand what the problem might be

Is there a chance it might just be a question of adjusting the setting on that little black box???

The heating was set to 'on' as well as the summer air circulation (I didn't leave it on summer only cos the house is very cold so we need the heat from these occasional firing-ups). Does the fact that the fan did not start when 'Summer Air Circulation' switched on point towards anything? BTW...

Don't worry, the panels only came off for the photos, normally the panels are on all the time