^woody^'s latest activity

  • ^woody^
    ^woody^ replied to the thread Removing Nails.
    Dampen the area with water or brush or a thick pva mix, then if you can, lever the sheet with a wide chisel or lever. If the nail comes...
  • ^woody^
    ^woody^ reacted to noseall's post in the thread RSJ Bolt or Weld with Like Like.
    Welded in-situ in a flammable environment - (n) We have had a few on site welds done, but always in a controlled open zone...
  • ^woody^
    I'm personally not suggesting it, but the standards and the whole science community do assert that warm air holds more moisture, and...
  • ^woody^
    ^woody^ replied to the thread RSJ Bolt or Weld.
    Any connection needs to be designed by the SE, not just yolo'd by the builder. An SE won't be able to certify a welded connection. A...
  • ^woody^
    ^woody^ replied to the thread AIB or Wood?!.
    The surface texture indicates a pressed board, and if it is from the 70's then it is likely to be AIB
  • ^woody^
    ^woody^ replied to the thread Leak from the ceiling.
    Is that a bathroom? Are you sure it's not condensation related?
  • ^woody^
    As property owners, with shared apportioned costs, what you should be doing is having the work independently inspected and specified by...
  • ^woody^
    Was that engineer designed? A bottom flange should not be loaded like that.
  • ^woody^
    Your fundamental problem is that you need a roofer who has a clue, and knows how to investigate. Looks like you need the top abutment...
  • ^woody^
    ^woody^ replied to the thread Leaking flat roofs.
    If the roof is bowing and ponding, that's an issue with the structure, and just coating it with anything won't rectify the ponding...
  • ^woody^
    ^woody^ replied to the thread Retrospective wall ties.
    I wouldn't bother.
  • ^woody^
    ^woody^ replied to the thread Leaking flat roofs.
    Does it need a new roof? Or repair? New liquid coatings can be applied over some firm stable existing coverings, but not over any old...
  • ^woody^
    The detailing is around the perimeter and roof window, which are the common areas for water penetration. If the leaking is at edge and...
  • ^woody^
    If someone is quoting for this type of work without scaffolding, you should give them a wide berth. 2 blokes, 2 days max would be more...
  • ^woody^
    The installers should be offering a system for the panels they fit. Normally £500-£600 extra for a typical 3 bed. Stainless steel...
Back
Top