Recent content by wookie_73

I was not going to use the spay foam. This is partly the reason I was asking what other systems are out there to get a good idea of what could be done. The reason for doing this is to try and cut down the noise and draughts. While the roof is essentially sound it has been very noisy and...

Hi I am looking into what is available to line a roof on a house. The situation currently is it is a old tiled roof (in good order) but due to the age there is no membrane between the loft space and the tiles. I was wondering what products are out there that could be used to line the inside...

What is a reasonable distance? If I don't put the switch above the hob the only other place is about 12 feet away, and the consumer unit is that far away as it is.

Basicaly the question is do I have to (by law) have an isolation switch, for the fan oven I am going to install? Currently it is going to be fed on a seperate feed from the MCB with no isolation switch, the problem is the location of an isolation switch as the only available space within arms...

Cool cheers, another person who likes late nights I see. 8)

Hi I am in the process of a flat conversion, the new meters will be installed on ground level and there will be a consumer unit in each flat (3 stories). My question is what size is acceptable for the meter tails? Will 16mm T&E be ok? Are there any other things I should be aware of with...