Recent content by worz

Thanks John I like the pebbles idea. Or I did have a thought that I could use wood again but cover it in roofing felt. Not 100% sure that would stop the warping but it's an idea.

Hi, We have a big step down from our neighbours fence. On our side there is a 3 ft wall of old concrete slabs with Feather edge in front to hide the slabs. On top of this are 2 Feather edge boards fixed together along the whole fence, probably 40 feet. As you can see the top is very warped now...

under shelf top

wood top

wood top

front of wall

Hi, I have this in the garden, as you see it is broken. I want to buy a replacement cover if possible, but I don't know what it is called? Any ideas?

Hi All, We have an old UPVC conservatory and as much as I hate it, it is staying, so I am going to attempt to fix it up a little. The Roof is the main issue, some of the polycarbonate panels have slipped and there are now a few cracks where water gets in. You can see the current panels are...

Hi all, can anyone advise which installation kit I would need to use for installation into a pitched roof with plain tiles. There's quite a few listed. Cheers Worz

Sorry for the delay. The Boiler is an old ideal mexico 2 and the hot water cylinder is a weird green colour. The top rad when bled does produce a strong flow of clean water. I filled half a jug! Agile, why would this have changed, as they have worked in the past.

Hi, I have noticed that when the hot water is heating the boiler is cutting in and out quite often. I am guessing there is air in the hot water heating loop? It is a gravity fed system with 2 valves. The Heating is working fine. What can i do to rectify this? Cheers

Thanks all. I have turned off the mains and also drained down the system as I was going to give it a run through with some de sludging stuff. Anyway the motor is now off, I guess I just need to order a new one now. Do these regularly stiffen up?

Hi, I have 2x 2 port valves one for the ch and one for the hw. When i push the hw one there is a little resistance and I can hear the motor moving open then returning to closed after. The ch one is not returning to closed any more. I can't really replace the whole valve as it is against the...

Hi, as per the title, is there such a thing. I want to have my sash windows open a little for ventilation. Cheers.