Recent content by XRB

No, I didn't get anywhere. I'd be interested if you make contact with Wavin. Regards

I have Osma RT-NV2 thermostats fitted in every room controlling the under floor heating. On two of them, although it looks like everything is working OK, the clock does not change. It displays a time but it stays at a single time. Therefore it does not switch the required temperature at the...

I haven't got to the bottom of the problem. The installation has been checked by an independent party and it all seems to be OK. I've replaced one of the faulty receivers and I'll see what happens. If I get another failure, I'll probably look for an alternative system.

>>Have you got the transmitter set properly? Everything was working OK for several weeks, so I'm sure the transmitters are set correctly. >>Are you running in dimmer mode or scene setter mode? I'm running in scene mode >>What type of lighting have you connected to the receiver? On 3 of...

Naturally, that was the first thing I tried. Their email addresses bounce with a redirection to a non-existent address. I have used the on-site contact form but nobody has replied. And I get no answer when I tried the phone number. I am still trying but I thought I'd have a go at asking...

I've had a GET wireless lighting system fitted which for several weeks worked fine. After about 2 months, one of the wall receivers malfunctioned so the lights were permanently on and could not be switch off. The receiver was replaced and for around 6 weeks everything was fine. Then the same...