Recent content by Yangers

That was my fear. Any idea if you can replace the parts or just a new pump?

There’s good flow on the hot when the pump is off so I can’t see how it would be a blocked filter. The flow switch turns on and the pump runs, but there’s no additional pressure.

Hi, I have a Salamander CT Force 15TU pump that has run fine for about 3 years. However recent overheated and tripped out. It worked ok for a few days but now cold side pumps fine, but the hot turns the pump on and the pump runs but there is no extra pressure. What could be causing this? Thanks

Cheers! I think I’ll put the sink waste through the wall and connect it with a strap boss to ensure there’s enough fall.

We have removed a macerater from our ds loo and will be connecting with the inspection chamber in the garden. The setup currently looks like this. Pictures attached. I have notified BC but I haven’t been able to speak to anyone with it being Easter. The air admittance valve on the white pipe...

Grand! Thanks.

So I have a light switch in a stud wall. I want to cut a door in the wall where the switch is and move the switch to the side. I know cables should run vertically. But my issue is I cant access the ceiling void without cutting a hole in the ceiling to move the cable over. Can you run the cable...