Hi
Boiler guy came for service and put a new jet in but we now have a bad smell, I can see a steady oil leak from the Allen socket screw above the bleed valve. Its loose, whats that for please? I can feel its on a spring so I guess not something I can just tighten up?
I called him, no...
Our Oil boiler Worcestor Danesmoor 15/19 went into lockout last night. Makes no noise, tried bleeding but as nothing running no go. I switched the power off and back on with no change. Just has power and lockout lights on and can hear the timer running.
Tried the reset button - Lockout light...
Guys thank you. Boiler is running again. Its a bit slow to get the rads hot but I guess its an old boiler, the pump was replaced last year.
Ended up with a Delta solenoid coil and some adapters. The BSP to flare adapter was nearly as much as the solenoid. I suppose in hindsight another way...
My mistake, male to male
1809107 - E7B 1/4"M x 1/4"M 230v Oil Solenoid Valve c/w 600mm Lead
Only place I can see that in the UK is Anglo Nordic. Cant find a picture, hoping one of the male outlets is long like the existing.
Thanks for the help. Out of curiosity why is the Brahma better. Doesn't seem to be widely available in the UK.
Haven't measured the existing yet but looks like it has male 1/4 bsp on both sides. The brahma will be 1/4 BSP female I think so I may get away with two 1/4 bsp male to male...
So this is the solenoid coil ?
I guess its likely that replacing that will cure the problem. Had a look online but cant find that model.
Will this do it?
COIL SOLENOID VALVE BFP21L3 - Worcester Spares
£57.64 including VAT
Ok disconnected and isolated the live wire from the silver solenoid in the first pic. The boiler does not trip the electric now but the lock out light comes on.
Hi, can u help please. Have a Worcester Danesmoor 15/19 OIl boiler and when switched on after a few seconds in trips the circuit breaker on the fuse board. Seems to happen when there is a click like a solenoid.