hi
recently our mira infuse mixer shower has been squealing when being used. if the temp is turned all the way to hot, it goes, and also go's if someone turns the tap on somehwere else in the house.
is there a pressure regulator or something that is missing, or needs cleaning?? have tried...
the one wall is square as its the side wall of the garage. the outside wall of the porch is not bad but is definately out of square as its only a timber frame wall clad with uPVC. the pic below is exagerated greatly but you get the idea!!
is it possible for me to lay the floor like i have...
hi
further to my other post in this section about flooring in my porch, i have aquired some ceramic effect floor tiles.
only trouble is the porch is not 'square'. The floow is wider nearer the front door and narrower at the internal door.
how do i go about cutting the sheets so that...
whats the best way of securing the plywood down on the floor boards??
i know i have pipes running underneath and i dont wanna go screwing into them but at the same time if i need to get to them in a hurry then i need to remove the plyboard quickly.
also, is the laminate floor adhesive on...
sorry to hijack this post but i was going to ask the exact same thing!! :oops:
what is best to use under vinyl flooring in a bathroom which is not going to act like a sponge!!!
george
hi
i recently lined the upstairs of my house and everything was fine. OPainted it all and looked great.
Now the paper has started to crack on the joins and i keep trying topaint over it to stick it back down but its not working.
is there anything i can use to seal the joints and then...
the enclosure is fed from the main CU in the house. The workshop is fed from the CU in the house. The workshop is all wired up on its own cable.
The enclosure is basically where the original electrician ran the cable underground and up the pillar and terminated it 'for future use'. I want to...
hi
i want to run power to my parents summer house. There is an enclosure on the frame work at the end of the pergola which is fed by 2.5mm SWA which was installed when his workshop was built. First question is is 2.5mm man enough to run workshop?? He runs saws, drills, planers etc but never...
luckily the nails are on the porch side so should be ok to get up i hope. and yeah i fitted it myslef!!!
will just get a threshold strip from b&q then. was just not sure if there was a more 'professional' way of doing it!!!
thanks for the advice people!!
cheers
george