Recent content by Zooropa68

Thanks, was thinking of buying a bag of 4 x20mm wood screws with flat pan head like the dowel screws. Think these would sit better in the slot.

I've bought a box of standard GTV kitchen door hinges to replace the hinges in my cabinets which have started to fail. The new hinges have come with larger Blum dowel screws. My cabinets do not have the holes for these, and currently old hinges fitted with normal counter sunk wood screws. Is...

https://www.diynot.com/diy/threads/wiring-from-honeywell-t40-thermostat-to-salus-rt310rf.530169/ I found this which seems to be similar to my situation.

Is that the regulations?

I was hoping this would be straightforward, but maybe not. I guess I could power the receiver via a separate external mains cable live and neutral, and just use same 2 wires which are for original thermostat.

The brown wire in it measures 240v The reason I want to change thermostat, is because it is in a large hallway next to a frontdoor, the temperature in hall is always lower than the living room and it can heat up too much. I want to put Thermostat in living room and have receiver in position of...

Thanks, so if I get my multimeter and confirm black and grey are connected on continuity check then I'm good to go?

Hi there, I'm upgrading my thermostat from salus rt310 to rt310rf, and want to make sure my wiring is correct. The Thermostat is connected to a 3 channel programmer. Inside the rt310 are 2 wires brown (live connected to COM), and a grey connected to NO. There is also an unconnected black wire...