Spalled Brick Advice

J

JamToday

Joined
29 Jan 2023
Messages
33
Reaction score
1
Country
United Kingdom
My mum's house has a number of spalled bricks (these from the chimney breast).

Some are also going below damp proof course in some areas.

My dad got the gable end rendered when he was alive because it got so bad.

The house is 30-odd years old, and the bricks seem to be crap, to be fair.

What should I do to prevent this happening? I am assuming I should replace spalled bricks, but should I also look to treat the walls as well?
 

Attachments

  • IMG-20240404-WA0002.jpg
    IMG-20240404-WA0002.jpg
    467 KB · Views: 47
Sponsored Links
Are the bricks being regularly soaked through for some reason, which then leaves them more vulnerable to freeze-thaw action?

Could be a leak of some kind. Looks like there's some kind of moisture issue going on based on the patterns and colours at that corner.
 
My Mums neighbour has kindly sent more pics...

It looks like it's from the roof, Do you have any idea what is most likely issue?
 

Attachments

  • IMG-20240408-WA0002.jpg
    IMG-20240408-WA0002.jpg
    227.3 KB · Views: 41
  • IMG-20240408-WA0000.jpg
    IMG-20240408-WA0000.jpg
    327.4 KB · Views: 42
Is that thing a chimney?

Perhaps water is leaking down the inside walls of it from the top, and soaking particular areas of the masonry from the inside out - possibly where the water reaches an obstacle inside. Then the freeze thaw process happens. The top of the chimney probably has a surface of mortar around a pot or flue. If that has been breached, water could be leaking down from there. Best if a roofer takes a look?
 
Sponsored Links
It could be because that area is exposed to the prevailing winds and driving rain. As Berty3000 suggests, get the chimney and roof looked at first! It appears to me that your mortar is harder than your bricks, which isn't good. The mortar should be the sacrificial element.
You can have the affected bricks cut out and replaced with similar. Once this is done, you could also consider using Bostik masonry cream to mitigate further water damage.
For the record, I replaced around 400 badly spalled soft reds in my previous home. We had the entire building repointed with a lime mortar and then a year later I coated the walls with masonry cream, which is designed to prevent water ingress whilst still allowing the bricks to breathe. This worked very well for us.
All the best!
 
Ollyfp said:
It could be because that area is exposed to the prevailing winds and driving rain. As Berty3000 suggests, get the chimney and roof looked at first! It appears to me that your mortar is harder than your bricks, which isn't good. The mortar should be the sacrificial element.
You can have the affected bricks cut out and replaced with similar. Once this is done, you could also consider using Bostik masonry cream to mitigate further water damage.
For the record, I replaced around 400 badly spalled soft reds in my previous home. We had the entire building repointed with a lime mortar and then a year later I coated the walls with masonry cream, which is designed to prevent water ingress whilst still allowing the bricks to breathe. This worked very well for us.
All the best!
Click to expand...

What did you think of the masonry cream? Did it perform as expected in terms of repellency and breathability? Did you put it on the bricks below DPC?
 
berty3000 said:
What did you think of the masonry cream? Did it perform as expected in terms of repellency and breathability? Did you put it on the bricks below DPC?
Click to expand...
I've used Thompson's Waterseal in the past, but having read the 'science' behind the Permaguard and Bostik creams, I decided to pay the extra and literally brush it over the entire house. The soft red bricks used to change colour as they absorbed the damp and they would hang wet for weeks on end during wet spells. After treating with masonry cream, the water just ran off the bricks as if they were engineering bricks. I monitored this over the two further years we lived there and there was no change in the resistance to water. As for the 25 year protection guarantee, well who knows? Lol
 
Oh, and yep, I went below the dpc and even coated the splash courses where accessible. I'm like that.
 
And all was well inside, ie. Humidity able to escape out through the walls and the masonry cream?
 
berty3000 said:
And all was well inside, ie. Humidity able to escape out through the walls and the masonry cream?
Click to expand...
Yes, super dry. It was early cavity wall construction with no infill ;) and all new windows had trickle vents. I'll see if I can find a photo...
 
berty3000 said:
Nice house! Looks very modern to me.
Click to expand...
Thanks! It became a labour of love and stole my soul, but other than that it was easy. Ha! The build date was 1951. We converted the roof from standard verge to parapet with dental courses, which made it look slightly ecclesiastical... to me at least. All the spalled bricks were painstakingly cut out with an angle grinder and with all the red dust it was like living on Mars for 3 months. The neighbours loved us soooo much! Lol
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

H
Replacing spalled bricks save the rest
Replies
4
Views
1K
KenGMac
KenGMac
W
Reclaimed bricks
Replies
3
Views
590
stuart45
S
X
Plasterboard or rendering to cover a few spalling bricks?
Replies
0
Views
1K
xelaris
X
C
Spalling Bricks & Timber
Replies
8
Views
950
Christopher Smith
C
H
Spalling
Replies
1
Views
214
Wayners
Wayners
Back
Top