Weird shower issue - no water!

S

SimplyWendyful

Joined
26 Jul 2026
Messages
10
Reaction score
1
Country
United Kingdom
Hi everyone,

Something of a weird shower issue. May need a plumber for this one but I’ll ask in here anyway just to see what you all think!

Wife and I have an electric shower in our bedroom. Across the landing is our main bathroom, which has a bath in it, with an old “telephone” style handheld shower.

Since 2023 when we moved in both showers have worked fine.

Recently (started just before we went on holiday mid July) we’ve started having an issue where the shower in our bedroom has no water. We press the button to turn it on, and nothing happens. But if we then go across the landing to our main bathroom and turn on the cold tap on the bath, the shower in our bedroom starts working. If we leave the bath tap on, the water supply to the shower is intermittent but if we turn it off again it runs fine.

Any thoughts?
 
I don’t think it’s a combi. It’s an oil boiler in the garage and there’s a couple of water tanks in the attic and a cylinder in the airing cupboard so I’m guessing that means it’s gravity fed?

There are pipes running vertically in the airing cupboard and there’s a T piece coming off the cold pipe which runs into another copper pipe which connects to a flexible hose going into the wall behind the shower in the bedroom.
 
What model of electric shower is it ??
Does it only have one water pipe going into it ?
 
So the electric shower is teed off the rising main to the cold water storage cistern in the loft?

This should be fine as electric showers should be mains fed... Some are not... Hence my question about tank fed.

The flexible hose sounds a bit suspect!
Does it have any kinks in it?

Also, try operating the electric shower with the hose disconnected from its base.
 
dilalio said:
So the electric shower is teed off the rising main to the cold water storage cistern in the loft?

This should be fine as electric showers should be mains fed... Some are not... Hence my question about tank fed.

The flexible hose sounds a bit suspect!
Does it have any kinks in it?

Also, try operating the electric shower with the hose disconnected from its base.
Click to expand...
It looks that way.

No kinks in the hose. I think it came with the shower.

When the issue occurs, disconnecting the shower head from the base makes no difference.
 
Sounds like flow switch is not activating.
So, could be checked for blockages but usually these just get replaced as simpler to get a quick fix that way.
 
dilalio said:
Sounds like flow switch is not activating.
So, could be checked for blockages but usually these just get replaced as simpler to get a quick fix that way.
Click to expand...
Is that inside the shower unit?

Why should turning on the bath tap activate it?

And is it likely to be an expensive fix?
 
Sounds like it could be a weak/failing solenoid coil or a faulty pull cord isolationn switch.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.

Similar threads

S
Hot water pressure issue
Replies
3
Views
911
Madrab
Madrab
S
Additional Hot Water System for Showers
Replies
1
Views
372
muggles
muggles
W
Pump installation for Shower issues
Replies
8
Views
2K
ChrisR
ChrisR
M
Power shower water pressure
Replies
1
Views
3K
ChrisR
ChrisR
N
Help with cold shower - Combi Boiler & Thermo Mixer Bar
Replies
0
Views
578
NC35
N
Back
Top