Search results

I would say that that is the control panel with an onboard keypad

Or reboot the router/booster

Yes any 0v will do

0v to C, NO to eng hold off, Change outputs > endstation outputs > pgm op > engineer access (think its number 59)

Just twist the blue and yellow at the kitchen pir and wire the hall with the blue and yellow i reckon that will work. Wrt the bell does it have the tamper switch with the circle base that goes at top left or is it the old style to the bottom left of the pcb ?

I think i worded that wrong lol, with them joined together in the kitchen do u get continuity on the cable from the panel to the hall? U can actually wire each detector with 3 cores if u link 0v and com in the detector, then wire the other core to eol terminal on the panel

Have u tried joining the blue to the yellow on the kitchen wire, then check for continuity at the hall.... had a similar situation this afternoon with a hidden joint

Looks like theres a stripped blue and yellow pair in your pic which isnt twisted up with the rest of the spares....

Press c to clear before entering new manager code then press yes and exit eng

1111 is eng code, you can reset the master code in the eng menu

Default manager code is all the 2s u will need to go into manager menu to change this or to add a user code

Take the wires from the tamper and 0v terminals and cocnnect to the negative terminal of the battery as they may be mixed up at the bell end. Attach 12v supply to positive battery terminal. Thtis should soslve your issue.

Link out the bell tamaper return in the panel and see if it clears

I would expect that there is still a tamper fault on the system

Hope you didnt get yourself in trouble with the wife lol

Must be using the same google account

Should have 12v between + and -R

Dont see why it wouldnt work