Search results

Will this one do?

Got an old circular saw & just removed blade to replace it. Can somebody correctly identify it or tell me what i can use instead please. Cheers

Afternoon guy's, just removed two door hooks from door & they have painted round them. One was stuck on with grab adhesive by the look of it & the other with a double sided pad. I think i have cleaned residue off, but is there something i should use to completely clean any residue off. How...

Something like this https://www.bathroommountain.co.uk/ohio-gloss-white-2-in-1-combined-wash-basin-austin-toilet-500mm-c78421?gclid=Cj0KCQjwjryjBhD0ARIsAMLvnF84tX5lAQDcC2dfC6KnqtKynErWOcaoNggs6D8jsWGvpQy2BLCPINwaAg--EALw_wcB

That's all we want it for. There was a tiny sink in there already but no radiator, so going to put radiator where the sink was.

That is my biggest worry, buying a unit & not been able to fit it.

No, from wall to pipe centre is approximately 235mm.

Cheers terryplumb, so buy the unit and go from there?

The wife wants one of those units with the sink sits on top of the unit( not bought yet). The pan waste goes directly into the concrete floor via a flexible connection. I will need to replace it with a rigid one(to connect sink waste) Do these units come in a standard size or do they vary by...

Cheers denso13. Many thanks

Cheers for that Madrab

Had some 15mm & 22mm plastic pipe left behind the shed over the winter. Is there any reason it shouldn't be good to use. Would it be brittle now? Obviously don't want to use it if there is a risk of bursting. Cheers

Afternoon peeps. I want to cap off pipe so that there is nothing showing above ground when vinyl is laid. Do the caps have a raised end or are they completely flat. Just concerned if not completely level it will show through vinyl. Is there away of cutting off pipe slightly below the level of...

The sink + waste + hot/cold are coming out. I'm planning to put a toilet/sink Combi unit in. That's going where toilet is now. I could rip everything out before plasterer tip's up, shouldn't be much of an issue.

Cheers CBW, many thanks

1st photo is mould before wallpaper is removed & 2nd one is after. I am going to get a plasterer in to sort walls out. What should i do to get rid of it before plastering? Cheers for any replies

Hi guy's, just started on the downstairs cloakroom. I've ripped off all the tiles & it's a bit of a mess underneath & i am not sure i have helped by trying to get the wall reasonable level for the plasterer(not got one yet). Should i continue or wait until i get a plasterer round? The other...

Foxhole, should i use sealant under the base?

Afternoon guys. Shower screen has been leaking more or less since we moved in. Decided to remove it completely & start from scratch. First photo is bottom of the shower screen where it sits on the bath. The two bits that are folded over are they supposed to be there (I didn't fit...

Cheers Blup