Search results

I have a rad to change position in a room and fit a new rad. All the other rads in the house are pipes flow to the top of rad. Return to the bottom It's a sealed system combi boiler. Would there be any benefit of piping fitting the new rad the same. Have never done it like that before. Is it so...

So put to ohms and I should get 0hms

To test isn't broken what should the readings be?

Ah I'm with you so I am testing if there is conunity between the cable ?

The blue and neutral pin on the one 10 plug?

Thanks so that's test between the live and neutral as it enters the drill?

Can you connect 10mm speedfit elbows on to 10mm copper?

It just stopped working one day when I tried it. It hasn't had much use at all in 8 years. No real heavy use. Was used maybe 5 times a year.

But the transformer works with other tools.

I don't think I have done that yet

It's about 8 years old but hasn't had much use at all. Because I got Ohms at the white connections. This suggests the bushes are ok?

Thanks I'll try that tonight. If it is 0hms there any idea where to look next?

So between the two white wires I got 0ohms well 00.6 is that close enough. I can't get a reading in the live and neutral incoming I think I'd need to pull the wires out.

Thanks so I test continuity at these points without the power on?

Where are the brushes on the drill please?

I do yes

Power to here

Power all the way through the drill press the button and nothing.

Would anyone have an idea why this boss 110v drill may have stopped working. I have taken apart to see if was a loose connection but can't notice any thing. I have had a volt stick near it and it picking up power all the way through. Thanks for any help

Was everbuild