Search results

Proba yeah hopefully won’t need to flush etc again and the mana clean will pick it all up Tks

Cool Thank you .. what do you think the ball bearing rattling about noise could be ? Saying that I just went to the boiler and that is materially died down now , just the old little gritty type noise and the radiator the same ?!

Ok thanks ..well the boiler and one radiator sound like there’s stones rattling around in them for want of a better description.. what might this be ? Thanks for your help

Ok thank you . It’s a main 28 he My issue is I drained down the system after using x400 and thst did the trick .. after I refilled the system with fresh water inhibitor etc I’m sure the central heating on some rads take longer now to heat up. Before I could hear the water running through a towel...

Hi all I’m sure This has been done to death but is it safe to remove the external metal case of my boiler , a Main he not sure the exact model . Someone has suggest the pump may be air locked so all I want to do is the bleed key ... Many thanks

Cool thanks

That’s what I assumed . Come to think of it I topped up with x100 last year after draining the undefloor heating with no ill affect . Have you used x400 ok In a system with mystery chemicals ?

Hi all . Had magnaclean installed and guy topped up with adey inhibitor . This will have mixed with the x100 that was in the system prior as it wasn’t all drained . Have read mixed things about this . Also I have some x400 I want to run through the systems and then flush etc . Has anyone mixed...

Yeah that’s what I thought and obv want to avoid ! May I ask your view on where to install the magna clean ? I know it goes on the return to boiler but instructions say before the filling loop . Some have said it doesn’t matter ? Cheers

Please someone help a newbie . I’m fitting a magnaclean and the Pipes are too close to the walk to use a pipe slice . Obv I can cut it with a hacksaw etc but will the copper filings cause issues running round the system ? Or what’s the easiest way to flush them out ? I guess I could chip the...

Thanks so I’ll put it just before the boiler as planned . Another question if I may , the pipe is too close to the wall to use a pipe slice .. obv I can cut it with a hacksaw etc but have read different views on the copper filings getting into the pipe causing issues.hows best to clean them out...

Hi all as above I’ve purchasd a magnaclean pro2 and looking for some help re where to locate it . I thought it could go just below the boiler on the return but the instructions say always ensure the filling loop is fitted after the filter . Without some radical changing of the current...

Thanks all hopefully will put out easily .. when replacing the pipes do you need to apply any twisting motion etc ? Thanks s lot

Hi all as above I have some pipe fittings that look like they are push fit . I need to fit a new tap how do i remove the existing pipes and can the fittings be re used ? Thanks

Yeah thats waht i intend to do when I can get the day off

Nothing works that's the point

Should the compressor not switch on regardless of the fan ?

Still nothing . Just a quiet buzz for about 5-10 seconds then all goes queit again ...

Took the back of the freezer compartment out . Not a spot of ice and Fan spins feely by hand

Mines been off for 3 days now with no more drips in freezer or tray . I'd guess this would be enough time for the ice to have melted ?