Search results

thanks all, for the replies the 150mm just seems a bit too big/heavy Im still waiting on Bosch testing/finding one that works. Theyve been doing that for 2 weeks, so it does not bode well.

Greetings I've been having problems with this sander. New-- out of the box, the sanding pad brake works fine-- switch on, pad doesnt rotate until in contact with the work. After about 10 mins use-- the sanding brake no longer works. Power on, and it spins/rotates like a banshee...

oops, button pressed :oops: there is also a switch on the front panel for winter/off/summer and just found this schematic, if that helps thanks again

thanks all, for the very helpful replies in "man" position, the DHW flow is now sufficient that the boiler is not kicking in/out [DHW going hot/ cold] but the CH pipe is still getting hot. is this more of a clue? I'll take the cover off tomorrow and have a look. Thanks again

thanks for the info. I re-searched here, [omitting diverter] and found lots more info on valves. I've managed to push the diverter switch to manual, [am I right in thinking thats DHW only on a combi?] and that seems to have solved it. does this mean its the head? my honeywell has a...

thanks for the reply. How do the valves differ? Do you know if honeywell have a tech email/helpline for this kind of thing? Thanks

Greetings. Both CH and DHW work on the Radiant RSF24 combi However, on DHW only-- with CH off, the CH pipes are getting hot and DHW flow seems a bit low. After checking the forums here, my best guess is the diverter valve is not working [jammed in mid position?]. I've tried moving...

thanks all, for the replies. sorry for my slow response-- been shoveling snow... the hammer is just one loud thump. I've had my hand/ear on the stop cocks when it hammers and it doesnt seem/feel to be coming from there. seems to be from under the bathroom floor. can you replace the...

thanks for the replies as for the threads-- are the only options 1/2, 3/4 1" bsp? also, any experience with these mini arrestors ? thanks

thanks for the reply its not that tight-- the photo is a bit misleading does that drain fitting have 1/2" bsp threads? can I just unscrew the stop end and put the arrestor in there? thanks much

Happy New Year! Ive searched here for info on pipe hammer it seems most likely caused by [very inaccessible] pipes not being properly secured I'd like to try fitting an arrestor. [the hammer stops if any tap is v. slightly open] the plumbing has 2 drain valves [and stopcocks], above...

did a search, but couldnt find anything they are sold as "makita" in a different colour. they are on clearance now, pretty cheap anyone tried these out? thanks

iirc, amazon sell bahco vde price fluctuates every few days, w free shipping, hope that helps

thanks again the black wire does indeed come from the valve, but it is [more than] long enough to reach the old [white] junction box. the new [grey] junction box was added recently. perhaps the [new] plumber thought about rewiring it correctly [when he was changing the programmer], and...

thanks very much for the reply/help the wire/cable in question has just one [red] wire in it. the other end is connected to the 1 terminal on the programmer [the programmer is right next to the junction/spaghetti box so its easy to see all this]. so, if I understand this correctly, the...

this is the one with the 1 wire cut [you can see it in the botton lh corner] and heres the plumbing. thanks again.

thanks for the reply/info shouldnt it be called anti-gravity then, as the hot water goes up :) sorry-- I havent been doing a good job of describing this. yes it does have a cylinder thermostat. tomorrow, I'll do a digram of whats there, and see if that helps solve it but...

thanks for the reply Im not exactly sure what I have! :? there are 2 water tanks, one small, one large, for each flat. one gravity feeding the hot water, as expected , the flat with the "one" wire cut, ch doesnt work on the "16" setting, unless you move both hw and ch manually...

the valves in both flats are honeywell v4073a1039 sundial Y plan diverter valves. However the new siemens programmer [installed by a plumber] was set on 16, not 10, which explains some of the confusion/issues. [this is in the flat that had the 1 wire removed] I've installed the other new...

thanks all for the replies I'll be taking a look at this again tomorrow, and will report back with more info thanks