Search results

Could be blocked cold feed

Does anybody know how to change the time on this appliance. Cheers dave

It's a diplomat john and there isn't any grey specks.

Washing machine making a grinding & banging noise constantly. Any advice would be grateful cheers

Washing machine making a constant grating and banging noise any ideas guys[/u]

Does this boiler have 1 pcb or pcb and ignition pcb. I'm looking tomorrow, customer has said that the boiler casing blew off and gas has been cut off and made safe. The Manuel shows just 1 pcb but my supplier reckons it has ignition pcb as well. Thanks for any advice.

Change the whole thing😓

Do I need to drain system and put replacement head on existing body because new actuater has 2 screws and existing has four screws . I'm thinking if I undo the 4 screws with ch full of water I'm going to get wet. Any advice would be much appreciated

Cheers Mark where was your damage and you could see the repair

Has anybody used the plastic surgeon ,I've damaged the base of a new acrylic . Chip is about the size of a Penney, would the do a good enough job or do I bite the bullet and swallow the cost

Cheers for the reply big all we have tried different tv and that works so it must be our goodmans LD3270D not working . We are getting no sound at all any ideas or do we need a specialist it's only 2 years old

Have a goodmans lcd tv and sky digital box that has decided not to give us sound,controllers work ok but just no sound any of you guys know what it could be

Exactly! I rest my case tosser

Meant push button valve rather than syphon and the valve fits 1.5&2 inch theres always someone that jumps at the chance to make out other people don't know what there talking about tosser

You've got it mate

The washer has a habit of not sealing due to scale or cable can stretch but it seems that the cord may interfere with the float valve which would cause it to overflow.push button cisterns do look nice but don't last as long as handle and syphon cisterns.turn water off and remove cistern turn E...

part E needs to be turned 180 degrees to sort it.cistern will have to come out to do this :D

just thought to throw into the mix :D

You could use an accumulater if you've got the room?it would have to be same size as the unvented cylinder though if you needed to use differant outlets at the same time

Mira combi showers are good