Search results

What year is house

Have used hammertoe to do a rad and never had a bad finish like that, what brush did u use

Hi, and with the new pull cord just make sure that I get the commons correct and as long as I get the blacks to l1 on both switches and the reds to L2 on both switches I should be good ??

Hi looks like intermediate switch has been used but not needed as only 2 light switches Switch says intermediate marked 1-4 Thinking I need a normal 2 way but unsure on wiring it with them using the intermediate switch

Hi can anyone tell me the best light switch to use on this please I believe it is different to normal 2 way switches says intermediate and numbered 1-4 Can’t find identical switch so thinking normal 2 way switch as pull cord is in room as well which I will replace, Guessing 1c is common? Then...

I appreciate your help thanks

So can I please clarify, if I fit the German bauberg calm 150 fan with pull cord and timer, am I ok fitting as it’s ip45 and suitable for zone 1 , is like for like installation into 3a fuse and also on a trip. I’m all ok with regs I believe?

Yea mate looking for a straight swap minimal work to be honest, want to work with what’s there. Have come across this version in chrome ip45 and also have humidistat version. Do you know if the humidistat version just needs wiring to the mains and will come on and off on its own ? Thanks

https://www.i-sells.co.uk/mob/prod_detail.php?cPath=1599_1109&products_id=48622 That would go in ?

Would it be possible to get a 6 inch fan wire to the fuse and have a pir fitted, or fit a 1p4 fan with pull cord ?

Hi you say ipx5 but fans in links are ip45 ?

Hi this is 6 inch duct

Hi thanks for reply Will measure up and get back in morning, it goes straight through wall above bath will need to measure approx 1-5 to 1.8m from floor not worked since moved in could be fuse, although I couldn’t open fan originally but have managed to open it on the string earlier so...

Nice one, thanks

Hi looking at changing an ugly non working 9 inch fan that is wired above fan to fcu Just wondered what’s peoples ideas about this regarding type of fan and regs, wanting something not so bulky but guess I’ll need to go into the hole already there ideas please

Ah nice one. Thanks

Hi came to change a light switch but the old one has a different type of switch see pic. I believe this is for like a hall way with 3 switches yet there is only one light switch in this room. I believe there may have been a pull cord a while ago but still doesn’t explain why this switch is...

Hi guys so after some advice please, I have dropped my chimney breast to 10-20 mm below floor level please see pics. Plan is to level floor build a wood frame that comes out 3 inch or so and then tiled with an electric optimyst on and a beam above, however my mate said will get damp and not...