Search results

Just a thought from a total numpty. Would it be acceptable to put a 2 Amp socket (e.g. https://www.tlc-direct.co.uk/Products/MKK0770.html) on a lighting circuit ? If so, that would give you a connection which could only be used for currents within the circuits capability.

I'm not a plumber, this is based on helping out at some neighbours whose CW tank was overflowing even though the valve, supplying the ball cock, was off. Their problem was found by a proper plumber. You say the HW coming on seems to trigger it. It's possible that comparatively high pressure...

Deleted - no longer relevant.

Markius asked "How did you do the maths to get to 540l/min?" I tend to imagine it's 60 secondsworth of 9l/sec.

Robert Dyas (might be on a nearby high street) usually have fusewire on sale. To this unskilled eye, the meter looks just like the one British Gas fitted for my flat (a few years ago) supposedly as part of the Smart Meter programme.

Anyone going to nominate this for a Darwin Award ? http://www.darwinawards.com/rules/

Living down to my moniker, might the quote mean that (in roughly 2 years time) this setup would no longer be acceptable (anywhere in the EU).

You could consider using IEC connectors, e.g. https://www.cricklewoodelectronics.com/Mains-Connectors-IEC-Euro.html but I haven't the foggiest as to how practical this is and, I believe, they're rated at less than 13A (maybe 10A).

There are some LEDs which give 100 degrees (or more) of light, such as: http://www.alarmsandlightbulbs.co.uk/gu10-light-bulb-24-smd-340-lumen-x-1-bulb-282-p.asp I'm sure plenty more are available but I do understand JohnBoy's point that they're not always too easy to find.

When JohnD said "bottom right yellow to the third from right bottom", I believe he meant "third from left bottom".

I can't help feeling that this'll get more accurate answers from "Plumbing and Central Heating", but ... You're right that not all the water is condensed internally, that's because the temperature of the flue gases is their dew-point, i.e. the air is holding as much water vapour as it possibly...

The Centre for Alternative Technology (in Machynlleth, Wales) reckons that it's pretty difficult to justify rainwater harvesting to flush domestic toilets: http://info.cat.org.uk/questions/water-and-sewage/can-i-flush-my-toilet-rainwater Cheers, Graham

My personal feelings (I'm not a sparky): 1) Yes, get a qualified engineer to change the socket and check the cable inside the wall at the same time. 2) No need to change the flex. Judging by kingdech's photo 7 at 1:39 p.m. on Sunday, the flex is reasonably long. So cut the flex a few inches from...

Thanks Nige F, it looks as though I ought to try the 49s.

I live in a Victorian house which many years ago (>30) was re-roofed using Redland 49 tiles. 2 tiles are cracked and I'd like to replace them although there's no obvious sign of a leak. Greenjackets say "This tile has been improved" (link...

Just living down to my moniker: I reckon Eric means "ambience" rather than "ambulance". Cheers, Graham

Boringoldcodger said "throw TBSE at a search engine". Whoops, I've found out that throwing: TBOE radiator connection is a better idea. From that I got link...

I know this doesn't answer any of your questions, but I've heard that when rad manufacturers do their measurements they use TBSE (Top Bottom Same End) connections, i.e. both flow (at Top) and return (at Bottom) on the left or both on the right. If you throw TBSE at a search engine and then spend...

A few years ago I bought an Osram 0.3W LED / 12W CFL B22 combined lamp (switch it on and the LED comes on, switch off and back on a few seconds later and CFL comes on), the CFL is claimed to be warm white, but no claim about LED whiteness. A few months later I saw they were being remaindered so...

Just wondering whether you were using an adaptor and, maybe, the adaptor didn't fit too well.