Search results

Can I ask why? It was just replaced with an old potterton ep p2000 programmer or something like that.

Could anyone explain how this only happens to the central heating contact and not the hot water?

So, do I just change the pump and see if that works? Or is it too risky.

This is good to know. Wiring isn't really my favourite thing to do. So let me just make sure i get this correct for a y plan. So I have my N L from the fused spur in the Wiring centre which i can take to the relay, then as the CH common is linked from live in the receiver can I link this at...

The pump is in the airing cupboard with the wiring centre. If I could do this, that would make life a lot easier.

Well done, you found the one in the picture. The problem is I cannot install it any where near the receiver.

Hi. Thanks for the advice and link. There is no spare place in the receiver to install this. Unless it is really small but I cannot find the dimensions of it. There is nothing about it specs I can find online. It just calls it the receiver. Sorry I cannot find any specs on the v3+ receiver.

If I go into the app, will it show me the model number?

Hi, it is mounted on the tiles in the kitchen. It does have its cover on it. The receiver is the v3+ kit. Does that make sense or you need more info?

Hi Thanks so much for your reply. The pump is a cheap pump i bought from Toolstation around 12yrs ago. I have put tado into a few places and never had this issue before. Snubbed circuit, will need to look that one up.

The receiver is in a kitchen and I don't want to have to run external cables from it to a relay somehow if that makes sense.

Hi. Thanks for the reply. Please see another video attached. I woukd like to install the relay in the airing cupboard with the wiring centre if possible. They have not told me which relay I need. I assume the brown and blue leads are just the neutral and live? Thanks for the reply.

Hi. I hope you are all well. I have installed a Tado v3+ receiver in my house for just over 1year. Around 3 weeks ago, the heating would just stay on always without any demand. As this was under warranty, tado sent a replacement and after 3 weeks it has done the same. The relay has fused...

Hi. Sorry to keep pestering. Could you advise which drill bits and length you use as struggling to find decent length drill bits that mention cutting into steel. Thank-you

Thank you

Thanks for the reply and advice. Got to be a long reach pilot bit though. Do you know what thickness you use as I have drilled out the threads before trying to drill the screw heads off! Again, 5hanks for the reply and advice

Oh, and if you wouldn't mind, it would be good to know the bits you use in the impact driver as well as the impact driver is a great tool for getting tough screws out a

Hi. Can you tell me what size drill bit you use to drill out the screws as I have one where the screws have rusted and I cannot get them to budge. So need to drill them out. Also, can you recommend some nice long length screw drivers as I am in need of a new set. Thanks

Thanks Ian. Good to know. In no rush to replace it.

Thank you for clarifying this. Appreciate it.