Search results

Hard job. We use a bully stripper which is amazing but costs a lot

Make sure you prime the floor 1st

Remove the tiles then plywood it all at 5.5mm

Looks like the chipboard is rotten. You need to get all the old flooring up and out and let the chipboard dry out by letting it breathe. Then see how much of that needs replacing.

I’d say it’s moisture. You could do with putting down a moisture suppressant.

Have you done the screws every 6” on the ply and every 4” on the perimeter of each side / joint

You need to sort them all out and stack them flat. You will then have to glue the edges together as a lot of the locking system will be damaged. You will need a flat sub floor to put them over as well.

Treadaire chromium 9mm 180kd density.

Take all the scotia off and plinths off. Check that you have a 10mm gap everywhere. No wood can be touching any legs or skirting.

What wood is it ?

it’s the design.

And when you laminate moves you can do the silicone idea again each year.

Not sure what meter you are using but that’s not a correct reading. how long has the concrete been down ? If that doesn’t have a damp proof membrane under it you could apply a liquid Dpm to it.

Should have used 6mm or 9mm plywood. I’d overlay that 3mm with 6mm. Fibre screeds]ing compounds would need min 6mm underneath them.

Ardex A45 -

So it’s 3 rooms? Thought it was 1.

What is the prep ? Does it say. Is it one coat of screed Liquid Dpm ?

That must include the preparation of the sub floor.

See it all the time from lazy plumbers and sparks. We fix all floorboards before laying plywood or underlays.

30m2 was he including adhesive with that ? We would be about that with vat . Any prep work would be extra. Like liquid Dpm and any screeding.