Search results

I am underpinning my bay window. I dug out the first section today and got down to the brick spread foundation. I am down 650mm to the top of the brick spread foundation. Do I now need to go under this foundation or could I just clean up what I’ve done and add the concrete.. the bay has...

No regs built in 1900. Spoke to BC today and I can only fit the maximum amount which the current roof can take. So I don't need to go to 150mm kingspan. Max amount will be 50-75mm.

As i understand it, if I renew my old slate pitched roof I will need to add insulation. The attic is actually a room and I have had the ceilings insulated with 40mm kngspan on the slopes and 270mm soft insulation on the flat section (under a green scheme). Do you know what level of insulation...

Anyone used these before ? It looks like exactly what I need https://www.screwfix.com/p/wavin-hepvo-waste-trap-white-40mm-x-40mm/3962k

It’s for my property and I would like a solution if there is one. Or do I drill a big hole in the floor?

I have the standard u shaped bath trap but it is too tight on this new bath I have put in I have 65mm of clearance. I don’t want to chop a hole out below the trap in the floor Are there some slimmer versions. I wonder if this might be slimmer than the one I have...

https://www.toolstation.com/washing-machine-plastic-valve-cap/p30766 Would this work ?

Anyone ?

The stopper for this outlet has disappeared. I’ve tried a Mac alpine 1 1/4 and 1 1/2 caps but they are too big. Any idea what part I need?

I have a taxi duotec and the pressure was at 0.5 bar and still working the other day. I topped up quite a bit to top of 1 bar. The next day the pressure was into the middle of 2 bar. Does this mean the pressure sensor is playing up ? Had it serviced in march and the vessel was pressurised...

Ok thanks for your help. Will get to the merchant

Hi I am going to change a broken tile at our squash club but not sure which tile I need. Someone has left some spare tiles at the club but we are not sure if they will work. Can you guys tell me if these will work and if not which tile to buy from the merchants. I am used to using slates but...

Had it balanced and better now. Got a external track rod end needs doing as well.

They were changed because it creaked when turning left or right on full lock or a tight circle. That issue has been fixed now. I think the issue is the power steering needs to be used and the balancing

On the end which attaches to the wheel. Forget the name of it. The rubber section waterproofs the bearing connection on the shaft I think

Sorry front drive shafts

Yes it might be the steering which needs to bleed. I haven’t driven much since it was done. Will get it retracted

On full lock or near it and on both sides the steering clicked and creaked. This has now gone. So the axel’s were replaced both sides. But I am getting a slightly different sound and I was thinking it is down to the tracking 2015 Citroen berlingo 1,6 van

The front axles left and right were replaced plus the collars which are rubber Citroen berlingo 1.6l van

The front left and right axles have been changed on my van. I get a little stiffness when I turn the wheel more sharply. Does this mean I now need the tracking resetting? It wasn’t reset by the mobile mechanic who did it.