Search results

Hi guy hope this is right place to ask I need to get a 100mm hole through my brick wall for a vent duct . Ive read about only using a core drill for doing core holes however alot of people use a sds with hammer off if it has clutch I have a 110v hilti te55 Can anyone suggest if that would...

As you can see here the gap i ment

Thanks for saying that , yeah had i been going right to the ceiling i think i would of looked more into the top and bottom as much as the left to right.. i set it all from over the other side which i will add a picture to show , which was to get a full tile onto of this boxing behind the bath...

Hi again guys sooo ive just about done the shower but kicking myself as ive ended up with a small cut at the bottom.. which i kind of new but didnt really think there was a way to get over it..now im thinking why didnt i jusy bed the shower tray down on a bigger bed and loose the couple of inch...

Hi guys again looking for some advice on tilings so what i want to ask is i have tiled my walls down to the floor leaving about a 4mm gap at the bottom when i come to tile the floor how close do i come to the wall tile do i leave same size grout space as ive done everywhere else ? and also...

thanks guys yeah so i will go with mix of the 2 then what ever give the biggest cut on the edges , ahh thats a good point you have made when i made recessed box i didnt set it to any tile i just though i would work with what was there when the time came and lucky enough its not a silly little...

Thanks for the reply So here is a couple more pictures one of the wall done and one of the shower As you can see there is the 2 options centre ground line wity a tile each side and a cut each end or centre tile with a bigger 500 cut each side of it

Hi guys so im doing my bathroom wall tiles and wanted to ask some advice about setting out Maybe a little late as i have already done 2 walls but how i have set them out is i have found the centre of the wall put a laser line up it and then i have gone left and right with my tile and the grout...

Hi guys so looking for some advice i currently have a wall in my house that is all over the place , it is not level and its running out i want to come say 3 inch infront of it and build a stud wall , i obviously understand the concept of getting the wall level top to bottom with a level but how...