Search results

I'll have nothing for a normal joiner to attach to, though... will post some pics later if I get a chance.

Does anyone know if it's possible to get a solvent weld coupling or adapter that fits INSIDE 32mm ABS pipe? Basically this, except that's American and PVC. If I am to simplify my waste pipe run so it doesn't look like a dog's dinner, I would need to cut off the existing solvent welded...

I'm going to have the same problem, and what I planned on doing was making the hole as in-line as possible with the outlet on the back of the dryer. Fasten a long length of flexible ducting to the back and feed it through the hole in the wall. As the tumble dryer is put back into position, feed...

mpeller jug replaced, and the dishwasher is away and working :D For the record, I disengaged the metal circlip with the aid of a pair of pliers so I could detach the inlet hose from the reservoir on the side. I then removed the aquastop inlet hose panel from the rear of the machine, by...

If the round to flat adapter isn't quite the right diameter to match up with the spigot on the hood, you might need to use soem adapters for joining lengths of round duct together to get a good fit. Toolstation and Screwfix sell them.

That's great, thanks! I suspect it will take me longer than 2 minutes ;) but will update with how I got on when the part arrives.

Actually, I just had a thought: if the impeller jug is seized, would a flush of hot water help free it up? The plumbers installed two cold appliance supplies and one hot appliance supply under the sink - the hot doesn't get used for anything. I could temporarily connect the dishwasher up to...

Hi, I have a Bosch semi-integrated dishwasher (SGI45E15UK/14) which seems to have this same fault. When I attempt to run a wash cycle, the machine fills, then the drain pump runs ejecting a small quantity of water, then it fill again, drains, fills etc. The check water light comes on and it...

Hi all, first post having gleaned much useful info from the site in the past, now hoping I can get some help with my own query! I need to get a cooker hood for my new range cooker. I have a problem however, in that because the kitchen has been moved, there's a long duct required to extract...