Search results

Hiya... I am looking to put a PA button by my front door (next to the 9943) Keypad. Can this be connected to the 9943 Prox Keypad ? I have a spare 8 core cable running back from the Keypad, but I think it may be possible to connect it to the Keypad.... Thanks, Richard

Hiya, The phone line operates at 50v DC. However, if someone should ring your phone 75v AC will be supplied down the line to operate the ringer. Have a look inside the current Master Socket. To see which Wires are connected to which terminals. You should have 2 or 3 wires connected to the...

Hiya, How do I make it non 470 eol ?

One other general question I am unclear on is.... Does the 9651 Panel actually charge the 12v Lead Acid Battery in the Panel ? Or does it use it just for backup power in the event of a power cut ? Also the same for a bell box... do they usually have the electronics to charge the bell box...

Hi, Sorry for the delay in getting back to you all... Thanks to all for all your help. I have uploaded pics of the bell box itself and found some documentation that came with the bell box... I am suspecting the 4k7 EOL resistor is the culprit... but that is just a guess... images...

checked and the microswitch is definately depressed... ie it should not be sending a tamper alert

Wired it up as you suggested... but getting bell tamper displayed on the rkp

thanks for your reply... what are the ext - and ext+ connections ? Thanks, Richard

GE Security AS580XXL

Hiya, Bit confused on the wiring here... Bell Box has the following terminals... Strb - Ext - Ext + Bho TL TR 9651 Panel has... OP1 OP2 OP3 TR SPKR - SPKR+ Any idea's how to wire it up ? Thanks, Richard

Thanks for your help. Have you seen the video I posted above ? did yours sound like that before you expelled all the air ? Richard

Could I have too many Radiators on the Central Heating Circuit and the Expansion Vessel cannot cope with the expansion ? I have 11 Radiators in Total... 3 * 1200 * 600 Double Convector 4 * 1000 * 600 Double Convector 2 * 400 * 600 Double Convector 2 * 500 * 1200 Towel Radiator

yes, I have loosened the screw cap off the pump and some water has expelled.

Would there be a filter in the flow or return isolators... ie when my 22mm copper flow and returns connect to the boiler ? as shown in the following video... http://www.youtube.com/watch?v=QWdjoyuwYWk

GC Number is : G20 47 311 54 Thanks

I cannot see a flow filter on the boiler.... I have looked in the boiler installation and servicing instructions and cannot see anything about a flow filter. Do you know if a 28i definately have one ? Thanks, Richard

Just uploading the video now, it is 90% done, so should be available in a few mins

Hi, I have recently had an extension built and have had the boiler moved from an upstairs cupboard to the downstairs utility room. We had new Radiators installed (8 in total) and completely new copper for the whole system. The whole system is new apart from the boiler. All the Rads are...

I may be wrong, but I believe there are permitted zones in the bathroom where electrical appliances may be. I believe there are 2 major zones where no electrics can be installed.