Search results

D_Hailsham thanks for your thoughts here re:- my rights etc., - unfortunately when I said originally this was " a long standing headache "- it has been since 1998, it was re-designed etc., in 2000, last dealings with the company on any paperwork is 2002 - so i have lost the 6 year rule on...

Ooooh! I'm just guessing here, but maybe this isn't your average domestic UFH installation? :lol: :lol:

Thanks so much for your help, sorry for my late reply - back home late, and only just got onto laptop. "1. Spur to boiler; Ls, Ns wiring centre 1 and 2, earth from boiler or elsewhere to wiring centre 3 ". Think I prefer this option so the CH is all turned off via one spur if needed...

D_Hailsham "I take it you are not talking about the IPPEC Pexatherm WG200 Delta Enclosure but a bog standard wiring centre, e.g Drayton or Honeywell ." Yes. "On ST10 on 30cdi Ns - 2 Ls - 1 Lr - 10 That means the wiring centre is getting supplied from two places: 1. the...

Very pretty too! :lol:

That might be the 3 port mixing valve. [b] I think you are right. Sorry if my terminology is inaccurate!

Thanks for all your suggestions. My OP was how to wire through the relevant controls. As I said at the outset - IPPEC designed the system, and the relevant elements have been installed accordingly. The problem is knowing how to get the Delta wiring through with the rest of the controls...

D_Hailsham I have uploaded some images - don't know how to get them onto this post but they are in my images. Hope they make sense

"Do you mean that the boiler and wiring box have separate supplies? If so, and they are both fed from the same spur, that's OK. YOu do not need the connections to Ls and Ns. YOu still need the connection to Lr, or the boiler will never run." No the boiler is currently served by one separate...

thanks for your help I just need a few minutes to work through my answer and try to get a drawing uploaded.

Try "Wedi Board" "Fundo" do a range of wet room/walk in shower bases for around £200 - £300 - you can make what ever shape you want, and its 100% watertight - if you follow the manufacturers instructions. Good luck

Controls are in order from the WB boiler: 1. External circulating pump ( to run system before any other controls ) 2. Heating to Ground Floor: -1 x 2 port honeywell zone valve (ref. to later as 'a' ), -followed by 3 port mid-position valve, -then another heating circulating...

Anyone got any ideas? this is a bit lengthy - sorry! Trying to wire up the controls for UFH, boiler, cylinder etc.etc. got Worcester Bosch Greenstar condensing system 30cdi - am getting a bit confused with what goes where - in relation to the programmer, which I was advised in an earlier...

Thanks - you're right, D.Hailsham has put me on the right trail - though I might have to ask one or two things as I go along! Can't understand why Agile - (not the most appropriate of tags for a guy so stuck in the mud against us mere DIY-ers! but there you are!) is so anti-females - saw...

And there's me thinking you had already decided I was the Ice-maiden Reincarnate!

Glasgowgas Is that the total amount of your contribution? How utterly fascinating and so VERY helpful :roll:

Thanks this is great - Simon suggested Ippec webpage earlier - this is the monster I have! Now I have to work out the wiring from this to the other controls - or ditch it as Simon suggested. Prefer the idea of "mind over matter" to resolve what in theory should be achievable. Looks like my...

Tony You are SO off the mark here! Do you have a part time job freelancing to one of the "lets make up a story" daily rags? Talk about make something up out of nothing. You have zero infprmation as to my custom and practise in employing the services of any trade or professional! I don't make...

Simon At over £400 for the Delta ,it's an expensive throw away! but then if it ain't being used, it's the same as throwing it away I guess. will go to the Ippec website and see what is there. I do have some experience electrically, but not with heating controls - give me lighting multi point...

Maybe i wasn't too clear at the beginning! What is wrong with the system is that it isn't wired up to be able to actually use the programmer - so it all operates via a simple timer - but I want to be able to programme the CH and HW for different times of the day. The manufacturers have driven...