Search results

Thanks for the advice....where would I find it,what does it look like etc!!, and does it need removing from the car to clean/lubricate..... :roll:

no...... its gives the symptoms of a sticking throttle cable..... but this has been thoroughly checked, and its all ok.......but thanks for the reply.

i've got a problem with a Ford fiesta 1.25, 1999, and was wondering if anyone can help please....... when coming to a halt, the revs are slow to return to a normal level, of about 900rpm...... but when the engine is "revved" up, without moving the car.....the engine just seems to return to...

Thanks lads for the advice..... will think about it first!!...... but really helpful :P

.... was going to skim wall, if possible, and not re-tile..... but other walls are partially tiled, and I was going to tile over the top of these, but some of the wall areas need to be "brought up" to the level of the original tiles, by possibly putting on a skim of finish plaster..... what do...

Hello there.... i'm just in the process of "re-doing" the bathroom, and have removed some old ceramic tiles....... leaving the remmants of tile adhesive etc. my question is..... I wanted to try skimming the wall myself,and i'm under no illusions that, I,m in for a difficult (if not impossible)...

Hello there..... looking for some advise on concreting........i'm going to make a concrete base for a shed, which will measure 12 x 10, and i need to know, what thickness, I should make the concrete, and what quantities, of sand, ballast, bags of concrete I should buy..... Many Thanks!

Thanks very much Paul C..... thats just what I needed to know!!, sorry about the post after your reply..... I seem to be having computer/forum delay issues!!

Thanks lads..... but are these sockets used in specific locations/uses, etc, or are they just safer to use. Many Thanks

........Thanks lads..... but are these sockets used in specific locations/uses, etc, or are they just safer to use. Many Thanks

Thanks Sparkrite....... and does any body know the answer to the rest of the query?.....Thanks

I've just been asked a question, and was wondering if anyone can possibly help........It regards sockets, whats the difference between a double pole, and a single pole socket?..... I'm assuming in a double pole socket, both the line and neutral are switched, etc..... but are these sockets used...

I see no ships...... only hardships!!

Sorry.... I think i've confused myself!!....... what I meant to ask was, can the extractor fan isolator be installed in zone 3, which is close to the fan ( and above it).....on the opposite side, to where the bath is fitted. I can't run off the lighting circuit, as we are in a flat, (ground...

Need some advice, regarding the wiring of an extractor fan in a bathroom.....can it be supplied from the nearby immersion heater circuit, using a switched fused spur unit, as the nearest point of supply, is from a ring main socket, on the other side of the wall, which is already fed from below...

Whats the main difference between a type "b" or "c" mcb......Thanks![/b]