Search results

Wood is wood. I used decking off cuts.

People can still throw bottles over the gate, what a poor reason.

Security I think was the wrong word the poster used. For me it works well, enter garage light comes on. Although the switch is next to the door.lol

Thats no good. The unit will be INSIDE the shed. Something like this. LAP RB0258A Outdoor LED Solar Floodlight With PIR Sensor Black 1200lm | Floodlights | Screwfix.com I have similar didnt pay much look on Ebay.

Its 595 to fit space 600, Air flow in in at bottom out at top/back, as long as the sides have a gap you aint got a problem. I would be removing the feet from the cabinet & replace with mdf/ply to the floor,, or even just fix it the cabinet either side.

Channel the floor

I think I would use a hole saw from the inside. But no doubt you will get expert advise shortly.

universal replacement dual flush push button toilet flush | eBay I bought these, chip as chips. A few years ago I bought an original cost an arm & leg.

My wet ufh has a thermostat for the mix, I have never altered it as I assume it was set up by the installer.

Yippee, all working. 2 issues. 1 black wire in ceiling wasn't the neutral. 2 there us a delay before the fan fires up & I wasn't waiting long enough. Thanks everyone who contributed.

Just tried that, still mo go. Thanks

Ok just started from scratch as your testing method, still not working (this is still on the bench so its easy to do). Im guessing its faulty will deal with it Monday. Thanks for your input.

Ok will try this Sunday. I'm still thinking the unit is faulty. I'm glad I'm doing on the bench, as my neck would he killing me. Lol

As far as I know. The fan I removed worked without ANY issues.

A power supply, yes so through a 13 amp plug.

Ok thanks just changed that round (its still on the bench) Brown/Blue 240 Brown/Black 167 Blue/black 0 Just found circuit on line So if I connect Timer to Live & Neutral to N the fan should run continuously ?

Rubber strap..use elastic band

My previous post was about a faulty extractor, which I replaced with a working one from the bathroom. This is now working fine in the ensuit as it should do. So I have just got a replacement which is an Xpelair VX100T. I installed it, not working, I have wired it on a bench as attached image...

So I am going to replace this fan with the identical one thats in the bathroom & replace the bathroom one. Any recommendations, there seem a few out there. 4" with timer. ceiling mounted about 1.5mtrs of trunking

deleted dbl posted