Search results

Honestly I don't know, not heard of that and about to google!

No sorry I should be more explicit, it's like a sub-base aggregate.

I'm going backwards and forwards with materials for doing a driveway, sideway and rear and quite like the material suggested in the title. It sounds simple and rustic and I think might work, but what it is? Cheers! Andrew

Just editing my existing. So the brick leaf will always be cold, if I join it in any way I'm bridging the cold to the warmer inner. So that's the reason for the BC officer when they ask?

Just a sanity check. I'm having two RSJ's installed, one on each leaf. Because the doorway is close to the end of the leaf and I don't want to start disturbing brickwork outside (for various reasons), the brick leaf is being extended by 150mm. This makes the leaf 250mm from the door (and the...

Or sodium silicate (waterglass)? https://www.amazon.co.uk/Liquid-Sodium-Silicate-40-High-Temperature/dp/B07NPVKDXP

Hi, I've made a retaining wall using 440mm dense blocks (20kg) on the side, so ~210mm wide. On to this I'll add a small fence which is the reason for not wanting coping stones, however I'm aware that in winter water might get into the top, freeze and damage them. Despite googling I couldn't...

I do sorry and there's only a little of it to prevent the gravel going into the weep hole.

I've a 10M long retaining wall as shown in the diagram. I've added weep holes every 1M at the bottom (basically missed the mortar in gaps) and then covered with a little DPM and 10mm gravel. I intended to use 32mm waste drain tubes every 1M above the soil level on the opposing side but I'm...

Foundation depth = 150mm to 450mm Foundation width = 300mm to 450mm Foundation top to ground level = 300mm approx Wall above ground level (rear) = 900mm Length = 10M, sides are 3M and taper to ground level Masonry = blocks (100mm height, 440mm width, 210mm depth)

Yeah, but that's the worst point at the left corner, an outlier. The rest has variance of 40mm.

So the damage is in. Left corner to right corner 0, -45mm, -80mm, -60mm, -50mm, -70mm, -50mm, -40mm, -40mm So I've over-cooked it on the left hand side then there was a dip and then it's reasonably flat. I'm thinking then I lay the right hand side as normal, then cut blocks to make the left...

Wanted a second opinion other than my own incompetent one! I've a retaining wall that'll be 900mm above ground level, 10M wide, about 3M at the sides. Digging down with the JCB, which I'd not used before, I created a trench somewhere between 300 - 450mm wide. It's widest at the mid-point (5M)...

How about I set the laser and use a ruler at one end then rotate the laser to point to the opposing end of the foundation, wait until dusk/dark (as it's too far in daylight), and ruler that end. I'll then know which end is higher? I can probably just walk the foundation as well during the...

String line level, genius :LOL:

I'm still not sure how string resolves the levels all over the 10m, I'd have to set the level by say a block and a brick and then drag a block all the way along making sure it doesn't come too close to the string (where there'd be little mortar)? Or alternatively use a significant amount of...

Hi all, I've just filled a 10M trench foundation, which has taken 2 days by mixer. I set pegs but there does seem to be a little variance here and there between them. 1. I read that I should start to build the corners first, but what happens if somewhere in the middle there's a bit of a hump...

A nice touch, I was expecting to grab adhesive mine with a load of timber offcuts to pad it out in places.

Looks like a smart job, curious why fill the voids with timber, to make it easier to drywall?

OK, so the builder will be installing an RSJ but it'll take only a day roughly, after which I'll be taking over and doing drywall etc. Thing is they want to do an inspection but it'll be getting covered up pretty quickly? Or is it common to tell them to get your arse round now? I can't see the...