Search results

Just powering down will not alter any settings. But, depending on the previous firm, they may have set it up for engineer reset if the system.is 'tampered'

I am still around, but not as often . I still wander in a look around. But due to work and life I don't post to often. Thanks nobbylon Pleased that you got your system up and working.

daft question what is an EWI. just a side note, i am not personally going to be carrying out the work, my builder will be doing it but i like to make sure that everything is done right first time, ( i trust my builder )

we are purchasing a cornish style prefab (lower portion only) property, am i required to contact building control / planning permission for building an external brick wall, and insulation, to the outside of the property. foundation? what is required. many thanks

ensure all zones are linked out make sure tamper circuit is closed, including the spring one on the pcb also make sure that T and A are linked out, (always better with a wire link) link PA to SET and reset to factory Oasis

i think its a CQR multibox product code; BCMB/BL/STD I have one on the shelf from a company takover, also i have a cover as well from a system takeover yesterday, if you want it contact me and we will arrange something for you. Oasis PS i am away for 7 days tonight, so sorry for any...

you also have to tell the dimension that the keypad is enrolled as keypad 10 or above, carry on in 42 and you should find it after `timed set menu. Oasis

we are insatllers of honeyweel galaxy kit, yep i rate it, fault wise, very few, operation is easy but it is pro kit, yes you can buy it off of ebay, but it wont come with fitting istructions. the manuals are available, but you have to get the right one. if you fit your own system, you...

yep thats right, unless your cable to the eternal siren has 6 cores then use the strobe connection using another one of the spare cores. Oasis

stb - ve strobe trigger, link to bell trigger if yu only have 4 core cable trig - ve = bell power -ve (bell trigger) hold off - ve = SA hold off - ve (bell hold supply negative) hold off + ve = bell hold off supply + ve (bell...

have you considered smoke cloak/bandit smoke units? they are brilliant!! Oasis

most modern flat type LED lamps are `soft start` to prvent inress failure, the older `tandard type` LED lamps (multiple leds crammed together), these we found failed sooner, and light output dimmed to under a quarter of rated light output in a matter of months. Oasis

you could try fea bay but you will not get it direct from Honeywell, unless you are a registered user of honeywell gaalxy alarm equipment. Oasis

+ ve 12v to 12volt aux - ve 12v to 0 volt aux tamper to TR siren trig to OP1 strobe trig to OP2 its that easy Oasis

sorry but if the system is set, you cannot even using RSS unset the system set your system up for lock out (locks outr faulty devices) and ensure you have auto re arm set up. Oasis

RRS is Remote servicing Suite, encompassed with Shell /Comserver it is used by pro firms to view/adjust/add and delete bits on specific control equipment also i can produce real time events if set up correctly. if you have a multitude of monitored systems installed, (or just connected...

Europlex, double balance comes to mind!! or commonly known as FSL! Oasis

PM me i dont put our costings on open forum Oasis

did you just buy the flex 20 and remote keypad, or did you buy it as a kit? as if you bought it as a flex 20 rf kit, you would have got three radio pir sensors, one radio door contact, a remote keypad and an rf portal. if you have not got an rf portal, you cannot put rf devices on it...

Jay the information you have been given is WRONG! the Flex 20 can be used as a fully wired system or a combination of wired and wireless via an RF portal! i know this because we only fit Galaxy panels!! if you need any advice, contact me and will advise you of what to do and what not...