Search results

Finally got round to ordering one after using bricks last years as a stop gap. How do I bed it in please? What do I use.

Thanks, but it needs to be a right angle jobbie,

More questions sorry, is there such a product which coverers the top part of the wall and where the roof meets up please? I need an L shaped profile at a right angle but not even sure what to search for? Guessing this will be plastic and I will use the same gunk I used on the roof overlaps and...

Thanks

Hiya, restarting this project now after a long winter, only actually fitted one panel last year. anyhow as the original pergola is far from square I have had to rejig some of the panels and they now have holes were screws wont be going, how is best to plug these please, dont want to put a screw...

Do they sit on top of the red tiles and you fill in the gaps with the mix?

Picture shows better

Sorry, I seem to have 2 accounts, Con1_uk and Conbrue is the same me :-)

yes, the mortar is falling away

I will have a look at the bulb and the fittings, the lamp is quite new (last summer), thanks guys

Hello, We had an outside light fitted some years ago, the light we chose was a PIR however it never worked right and I swapped it for a simple on off switch (light fitting replacement only) the old PIR light still operated through a switch that hasn't changed. Now, the light only works...

Hi, I have booked for an EV charger install through Hive and it asked me to do a survey, one of the questions was to take a picture of the earthing on the incoming water pipe. My pipework seems to run either under the floor or between the walls (1995 build) the water meter and only accessible...

I do have a rad in there with a Hive TRV so I can control that one room if needed, I will give this a try, thanks

Hi all, We have a conservatory (Wife calls it an orangery....), it gets cold in there as it has a glass roof and there is no point putting the heating on to warm it, we only really use the room during spring, summer and Autumn, during winter we don't use it at all. Separating the two rooms is...

It’s 3x2 is have spare

Already bought the panels if I have the 2inch of the wood flat then I technically have 50mm is this long enough for the hex bolts? Can you recommend some tape please?

Hiya, front to back 2.6m will be 2 sheets, how big does the overlap need to be please? This started life as a pergola which is fixed into concrete on all four posts, the current front to back wood I could possibly raise on the front edge? I have some 3x2 left over so may utilise this so the...

Evening, went for the metal none see through box profile panels, my roof area is 2.4m wide and 2.6m front to back (run off front to back), how do i make sure there is enough fall from front to back please? I need to run 2x1 across at 400 centres and could use a mix of 2x1 and 1x1. Asked chatgpt...

Had a rethink after I saw my neighbours shed, they have some bitumen sticky tiles on their outhouse, are these a good option please? I don’t need light to come through, are they just fixed (stuck) to some OSB or similar please?

Any ideas please folks