Search results

is fibreglass Loft insulation supposed to cover the air gap cavity between inner and outer wall in the loft space? or are you supposed to just insulate up to the inner wall edge - in other words do you take the insulation all the way to the eaves or should free air in the loft circulate down the...

ah right, thats what it could be - im not too sure but yes i think the clothes were near to getting dry when i plugged in the energy meter so indeed it could be that thanks.

oh right i see what your saying - but in that case why does the Beko instruction book say it dries synthetics at a lower temperature when it uses the same wattage as on the cottons/coloreds temperature ?

Ive been observing the wattage my BEKO Drvs62 Tumble Drier uses (as you do!). I have one of these plug in Digital energy meters. When I set the tumble dryer on Cottons ready to wear it reads 1573w and then after 30 seconds it reads 2103w well thats fine because cottons should have high heat...

thanks been like this since around sept/oct since had rads on, had noticed the immersion tank stat on 80c but the boiler to 60c so the zone for the hot water would have always been open, but i put boiler to 65c (now im running rads) and cylinder stat to 60c so when both satisfied both valves...

Hello I just want to ask the question on average how long are we talking in months or years for radiators and central heating pump to get damaged by oxidation when oxygen enters the central heating through the C/H cold water header tank in the loft? - at the moment if the copper immersion...

solved: Whirlpool wrote back and confirmed it was indeed for selecting the tablets. Off for powder and 2-1 ect when using 2in1 dishwasher tablets

had the recirculating pump apart today and found this: So no wonder the arm wasnt going around, not enough force of water going through it. Wish now i checked pump first before ordering a reconditioned spray arm - ah well you live and learn

Hi there on a whirlpool ADP7406 Dishwasher if I turn on Machine and put the dial to Pre-Rinse and long press the start button for more than 7 seconds the LED Display turns to off and if I press start button again the LED display changes to 2-1 then if I press the start button again it says 3-1...

Hi there just become owner of a second hand Whirlpool ADP7406 Dishwasher. Seems to work fine except for when I opened door quickly I noticed bottom spray arm was going around but top arm was not moving. As a test I positioned both spray arms in same position, closed door then opened up the door...

the bathroom is downstairs and the attic in the loft, from wht I can make out the easiest if not correct way would be to do it is take of feed from cold basin/cold bath/toilet cistern from bottom of storage tank and blank that off and put a tee on the mains pipe going to storage tank ballcock...

The Bathroom basin cold taps where we clean our teeth comes from the cold water storage tank up in the attic - what if I were to modify the pipework a bit and hook it up to mains water instead? - any problems? any breaking of water law (in Ireland, so water law may be different to UK) ? and just...

Thanks everyone for your help and solutions but I turned on the cold tap this morning and cold water flowed out! - I dont get it, its like its magically fixed itself! - I didnt do anything different from the day before I still left the shower mixer turned on and just switched off by the power...

cheapest shower pump I found was 220euro and I had a Mira Elite pumped shower unit lying around that I boot from car boot sale for only 20quid, dont think the heater tank was/is working OK so I disconnected heater alltogether i only wanted to use the pump part anyway so just left the pump part...

for 47 years of me life have always washed my teeth from water from the cold storage tank up in the loft which goes to basin in the bathroom - we have only ever had cold mains at the kitchen sinks in all the houses i have lived in - yeah but admittedly there are dead flies and scum and god knows...

well I could turn off the lever to stop the water (then the motor noise changes, goes higher pitch I think) and then I can step out of shower and pull the ceiling pullcord switch, as long as doing it this way it wont ruin the motor having a couple of seconds it running without water going...

I have got the Shower unit tucked away neatly in the airing cupboard (which is behind the shower cubicle / mixer tap /shower head) so i didnt have to drill into tiles and have the shower unit inside the shower cubicle - in any case I think the front switch on the shower does any different to...

Thanks Paul, Well the way i am operating it at the moment is (so as i dont burn out the motor pump by letting it run dry) is I leave the lever on and then pull the 45amp cord just outside the shower cubicle to turn the water/shower unit on and off (shower has solenoid in to cut off water when...