Search results

Good point about them being powered 24/7. I've never thought of that. On reflection, yesterday, I connected the charger for my drone batteries to the wall socket USB and later that evening, the battery had stopped charging. I realised that the charger for them has a dedicated plug charger, and...

Thanks for your reply. The sockets are working OK, just the USB's that are not. The faceplate is constantly warm (not hot to the touch, just warm). Is LAP a reputable brand? I'm just looking on Screwfix for a replacement.

I have a metal plate double socket with two USB ports and I have noticed today that the USB's are no longer charging my devices, and the metal plate is warm to touch. I've never previously noticed the plate being warm and the USB's have always charged devices without issue. Is this something...

The oven does work, but not the light until the clock was set.

Unfortunately, that sounds like a more serious issue. In your original post, you were going to ask your dad to check it with a multimeter. What was the result of that?

I understand that, but why does the clock have to be set to turn the oven light on when the grill light works without the clock being set!

Why did I not check this forum first!! I had exactly the same problem as described above, replaced the bulb with one I had from years back, didn't work, so thought over time maybe it's become faulty. Took an hour long round trip to Screwfix to get a replacement bulb, and that didn't work either...

Many thanks for all the replies, I really appreciate all the suggestions. On the back of this, I bought a LAP trailing edge dimmer switch and some LAP 2700K GU10 LED bulbs. I've installed the dimmer switch and BINGO, got the warm light effect that I've been after. I have tried it with the...

I have ordered two different sets of GU10 LED bulbs that purport to be warm white, but both sets give off what I would describe as a stark or cool white illumination. They do not emulate the GU10 halogen bulbs I am replacing, and I am now wondering whether there are equivalents for these. The...

Many thanks. It was in the “Auto” position when I last looked. Both of them have been in operation for many years so maybe time to be replaced.

Thanks for your reply. On closer inspection, there are two of these valves, the other is a Honeywell F3-9601. The affected one is in the "Auto" position. What do they do and if it's now not working, how will this affect my heating and hot water?

During the early hours of today, this item was making a loud buzzing noise, which eventually stopped. I don't know what it is or what it does, and I don't know if the noise stopping was indicative of it now being broken. What does this do and if it is broken, how will this affect my heating...

Good points. Ultimately, I'm trying to reduce cost. I use my current dimmers to light stairs and hallway, and also my office, where I don't always need such bright light.

Thanks to everyone that replied. Appreciate your help and advice.

I want to replace these bulbs with the low energy equivalents, but do I need to change the bulb holders and do I also need to change the dimmer switch as I’ve seen there are two types of dimmers called leading edge and trailing edge, but I’m unsure what I would need. Thanks for your help.

Certainly will. Thanks.

Hi, just thought I would provide an update. Had a sparky come round this evening and, as I previously said, the arcing noise didn’t occur and hasn’t since I examined the ceiling rose the second time. The sparky checked the dimmer connections and was happy with those. He then checked the...

Although the kitchen and dining room are nearby I doubt they put the transformers outside of the kitchen. In reality I just don't know. Will update the thread when I find the answer. Thanks for all the help.

One other thought. Could faulty transformers connected to the cabinet lighting cause this?

I've checked as far as I can see and that fitting has been in place for several years as has the kitchen lighting. Yes, when I connected L1 & L2 the lights didn't come on. I thought I had a faulty dimmer but on closer inspection of the picture I took of the original dimmer and wiring I realised...