Search results

  1. Door threshold

    Door threshold

  2. 20260505_144411.JPG

    20260505_144411.JPG

  3. 20260505_144429.JPG

    20260505_144429.JPG

  4. 20260505_144457.JPG

    20260505_144457.JPG

  5. M

    Need to bring the door threshold to be level with rest of floor

    I cut out a section of the chipboard flooring to see why it was moving so much when weight was applied, and I found it was never properly supported. The floor is a floating chipboard floor on top of 50mm polystyrene, but where we get to the door threshold the polystyrene stops and we see the...
  6. M

    Water seal depth on shower waste

    It's on the same run as a bidet that never gets used. There's a bath and a sink on a perpendicular wall. I guess they go into the stack separately. Perhaps I should investigate the connection that end and see if it could be lower. The easiest option would have been to simply increase the...
  7. M

    Water seal depth on shower waste

    Interesting. I don't think I've seen any traps with more than a 50mm water seal, nearly all are 50mm. Perhaps this regulation is not adhered to very rigidly? I have just found this guide that says shower and bath is 50mm all others 75mm...
  8. M

    Water seal depth on shower waste

    Hello, my understanding is that the water seal depth is supposed to be at least 50mm. I was about to use this mcalpine trap, but it only has a water seal of 25mm https://mcalpineplumbing.com/traps/shower-traps-accessories/st90cp10-53c-90mm-shallow-shower-trap-53mm-high The reason I was going...
Back
Top