Search results

Oh really. I can see it all on mine. Do you know how I can fix this?

Confusing isn't it.

So, I have been looking at this and think I believe what I need to do is detailed below. Have I got this correct. Thanks.

Morning Mattylad. You are up early. I am not sure what you mean, do not do it? I do know for a fact that the whole heating wiring is from a single fused spur. Once that is turned off, then the whole system is dead. I hope that makes sense.

There is only one supply to the heating wiring. Naughty if you use 2 as you could isolate the supply thinking it is dead and then get a shock because it has another supply.

To be honest, I don't think I will move it. It should be ok where it is as long as I can use a relay next to the wiring centre.

Oh, If I click on it it becomes enlarged.

Thanks for this. I believe a 3a fused spur supplies the wiring centre and then goes from the wiring centre to the tado receiver.

Like this...

Can I ask why? It was just replaced with an old potterton ep p2000 programmer or something like that.

Could anyone explain how this only happens to the central heating contact and not the hot water?

So, do I just change the pump and see if that works? Or is it too risky.

This is good to know. Wiring isn't really my favourite thing to do. So let me just make sure i get this correct for a y plan. So I have my N L from the fused spur in the Wiring centre which i can take to the relay, then as the CH common is linked from live in the receiver can I link this at...

The pump is in the airing cupboard with the wiring centre. If I could do this, that would make life a lot easier.

Well done, you found the one in the picture. The problem is I cannot install it any where near the receiver.

Hi. Thanks for the advice and link. There is no spare place in the receiver to install this. Unless it is really small but I cannot find the dimensions of it. There is nothing about it specs I can find online. It just calls it the receiver. Sorry I cannot find any specs on the v3+ receiver.

If I go into the app, will it show me the model number?

Hi, it is mounted on the tiles in the kitchen. It does have its cover on it. The receiver is the v3+ kit. Does that make sense or you need more info?

Hi Thanks so much for your reply. The pump is a cheap pump i bought from Toolstation around 12yrs ago. I have put tado into a few places and never had this issue before. Snubbed circuit, will need to look that one up.

The receiver is in a kitchen and I don't want to have to run external cables from it to a relay somehow if that makes sense.