Search results

Looks that way, can it be spot pointed in places, will I get away with out lime if so or could I just do the bits needed with a gun

Why cause extra work, no need to size, use Wallrock fibreliner cross line 1m sheets, long pile roller sleeve and use Wallrock ready mix paste simply paste the wall and hang. Then paint

More pics

1920s building came in this morning and found what’s in pics, porchway with bedroom above so can’t be a roof issue Main issues where paint has cracked off and this porch suffers with bad condensation in winter

Hello there couldn’t get the light cover off to check wiring in ceiling rose so least I know of an extra problem as I wanted to change the pendant oh well so went with 3 wires into one and I never knew also the spare room was not working but happy to report back all 3 rooms working spot on thanks

Am I right in thinking the black would be the switched live

Sorry that’s what I meant 3 together next to blue and black. The other terminal has no screw piece in so that was never used.

hello there yes a red comes from same sheath as black so guess they are going together so just leaves other red, will try that first and report back thank you

Good evening, I undid the top floor light switch for papering yesterday to find 3 wires not attached at the switch when I removed it, the picture with the wagos are the wires that were lose (2reds and a yellow). The first picture shows red with masking tape in common and black and blue...

As an appliance engineer you break any warranty and repairs if silicones down, I loved turning upto a warranty job on a hob top when it was siliconed down as I had to then refuse repair and they would nee do to rebook once they had removed the silicone lol

Only one supply and voltage there all day

Na my ones at home are always live

Hi there after wallpapering mums wall I took 2 storage heaters off and they had old illuminated switches in place. Using voltage pen I put terminal blocks on before papering and one was completely dead and isolated but the other was showing voltage on the pen. So one has had a blank plate on...

Like you say do I gamble on small area but does say vinyl tiles

Oh this stuff bonds ok mate I dropped it in 25mm deep and dried in 4 hours it’s got fibre reinforced In

In fact I thought I would just see if it said owt and says can go over vinyl tiles so think I answered my own question thanks pal

No nonsense pal upto 50mm I used it under cabinets to about an inch

Hi anyone done self levelling over glue down vinyl tiles. It’s on a concrete floor stuck down sound just need to level the corner of kitchen 2mx1,6m at 15mm thinking sbr primer then levelling

Thanks guys got this done today after help

Nice one pal, that is great news, so it’s as simple as wiring the 6mm flex onto a socket. I was fearing the worst and expecting to have to change the cable having spent a bit on it. The smaller length of cable in pic For hob was too thick for the hob so had to use the pre wired cable from the...