Search results

Burry it in the garden with loads of insulation around it. Have a look on something like navitron web site as loads of nutters like you inventing stuff.

some of the rads may be tee'd into the cylinder flow as an old heat leak circuit if the systmem used to be solid fuel. Dont fit a double check valve, its not designed for that use

Thanks to all that replied. It is not me completing the form, i have instructed the work and was un sure as to correct form being given me.

Thanks. What if the certificate has no phase rotation test box to check

Is it allowed or must it be on a commercial certificate?

It will work until the space fills with soot and birds nests, catches on fire and burns your house down. Really should have a T piece on the back of the stove to which a short length of flue pipe passes through a register plate fitted up in the opening and connects to a liner. The bottom of...

Treat em mean keep em keen

Not me waiting , a customer : o

Is that the record for a reply? 14 months ! Thanks mate, believe it or not job still waiting to be done so it's still an option ; )

Who said it wad 30 ma

Think it would hazardous and inconvenient to drill through a 100amp cable

Which part

To make it clear this is an upgrade of tails whilst fitting new cu. The existing ones were in the cavity Verticaly (about 1.5 m) between meter box and cu but not protected in any way. I've run new ones in flex conduit and going to protect them with rcd at meter.

Hi. Can someone please tell me if new replacement meter tails should be run in a flexy conduit in the cavity. Many thanks Cider To clarify, if in the cavity.

Hi Can someone please clarify if the pull cord for an electric shower is allowed to be in zone 2 of a bathroom. ie, the switch itself is out of the zone but the cord is not. Many thanks Cider