Search results

You won’t be saving much if anything. I monitored exactly the same thing- heating duration via the nest, versus our actual usage on Hugo. On weekends the duration was more obviously, but that would equate to something like 5kW gas. So for a saving of 20-30p we’d come back from work to a really...

Not convinced zoning and set backs are any cheaper to run long term. Even with the gas boiler and nest thermostat geo fencing to switch off when away from 0700 until 1700 (when at work) the difference in our gas usage versus weekends was negligible. I then tried smart TRVs and zoning areas of...

Ah yes that would probably be the simplest way. I guess I was a bit concerned about it sagging on the longer run across and whether there was a better way with rigid pipe, and a shorter flexi connector of some description. Perhaps I’m over complicating it though .

Hi all, In the final stages of my shower room project and now need to sort the pan connections for the toilet. We have a 110mm pipe exiting from the wall as per photo (the black is just tape and bag to cover it whilst renovating). There will be a slight fall taking into account the height of...

If it helps, we have an averagely (at best) insulated 1970s house. To give you an idea, full width dormers across the first floor. 12mm plasterboard and 100mm loft roll type insulation crudely taped to the reverse- then cladding tiles. In places around the eaves we actually have no insulation-...

Thanks very much for everyones help and advice! Edit: found this video which explains it really well in terms of why 45a circuit not needed.

Great- will order some of that. Having had another look I can indeed see the little U shaped metal connector pieces (y)

From the AO website.... smeg cooker Product specification and then installation bit

Ah right...makes sense. I have now unscrewed the small backplate and can see the 5 connection points with correlate with the wiring diagram on the back. Thanks for confirming the 32A circuit will be fine. Last question, I think. What cable do I need and how would I connect the live and link to...

I did wonder that, as there's no way AO were going to do that with the swap over. All they wanted to know is whether there was a big red switch... https://shop.smeguk.com/range-cookers/electric-cookers/c6ipxt2-60cm-concert-pyro-cooker-with-induction-hob-and-digitouch-control-stainless-steel/...

Thanks both. The new oven fuse rating is indeed 45amp. We have a big red switch (I can remove it to double check the reverse but looks like oven switches are all rated at 45amp?). I assume I may well have a cooker connection unit behind the oven somewhere? The breaker is B32 (it's the one...

Hi all, We've got a new freestanding electric oven with induction hob- I need to replace an existing integrated gas hob and oven. Quite happy with the worktop cabinet alterations....the kitchen is being redone soon anyway. I'm also getting the gas meter removed in a couple of weeks so...

We've had a 12kW ASHP installed. Noise- negligible I would say. My bathroom extractor fan is noisier.

You will be fine with expanding foam around perimeter, and then trimming it back. Whether this is more effective than what you have in situ, is possibly debatable. With the ply overboarding you are screwing it down at 150mm centres I'm guessing, so any expansion will be negligible anyway.

As a non plumber/heating engineer I might have missed the point, but we've just gone from a quite old condensing boiler with a set flow temp/nest thermostat to an ASHP with weather compensation. It has been running all of October and cost us almost exactly the same as last October (taking into...

I have one of these: heavy duty tile saw and this blade is the best I've tried so far with it: diamond cutting disc Cuts through porcelain tiles without a problem-nice clean cuts without chipping. I have a Rubi score and snap cutter as well for straight cuts on larger tiles but can't really...

Even if everything straightforward that's not a half day job esp if pipework to rads needs altering. 1 day, plus time to purchase materials...if day rate is £350 to £400 I'd say 1.5 days is more reasonable + materials. Thus I'd go with Notch7s estimate, personally (also not a plumber).

You can buy Fernox express test kits which you can do at home, taking a small sample from a radiator/magnetic filter. I've ordered some as we have a similar scenario to you (want to check following system drain and refill and don't trust workmanship). The full kit containing 50 test strips is...

Reasonable. As with all these things it is a combination of a few issues and the thermostat ‘misunderstanding’ with this particular company (which is a stone bonker- they’ve charged in quote for new one), has proved to be the tipping point. Which I’m pretty sure is covered by another offence:LOL:

Some of it. Some of it they left and I took to the tip. But, I said this wasn’t a problem as I go to the tip quite a lot so no issues there. There was nothing in the quote or t and c’s regarding waste. I didn’t say anything because to be honest I forgot. I get some peoples views that this is...